Abstract:The plasma sprayed Fe-based Ni/WC composite coating on the surface of 45 steel was post-treated by laser remelting with the addition of nano-SiC. The effect of laser power on the interface microstructure of a laser remelting nano-SiC modified Fe-based Ni/WC composite coatings were researched. The metallographic structure, microscopic morphology, phase composition, and microhardness of the remelted layer were visually analyzed by metallographic microscope, scanning electron microscope (SEM), X-ray diffractometer (XRD), and microhardness tester, respectively. The results showed that the nano-SiC modified remelted coating was smooth and compact, and with no fine cracks. The remelted layer was mainly composed of [Fe,Ni], Cr, Fe0.04Ni0.36 phase. The metal elements Fe, Ni, Cr, and Si, and non-metallic element C, appeared to diffuse, and there was metallurgical bonding between the coating and the matrix. With the increase of laser power, the smaller the average grain size, the wider the half-peak height (FWHM), and the more obvious the grain refinement. When the laser power was 500 W, the interface metallurgical showed the best effect. Furthermore, the nano-sized SiC particles served as the core of the heterogeneous nucleation to refine the grains on the one hand, and promoted the formation of a hard intermediate phase in the coating on the other hand. Therefore, the laser remelting and the addition of nano-SiC particles greatly improved the microhardness of the coating. The larger the laser power, the smaller the microstructure characteristics and the fewer the number of holes. With increasing laser power, the hardness increased in general terms and the maximum hardness increased by 51%.

Influence of laser surface re-melting on microstructure of steel-bonded carbide DGJW40 alloy prepared by electro-slag melting and casting

Effect of laser lower and remelting on the microstructure and tribological properties of GH3230 superalloy coating fabricated by laser melting deposition

The effect of laser energy density on the microstructure, residual stress and phase composition of H13 steel treated by laser surface melting

Effects of laser power on the microstructural evolution of novel Ti–6Zr–5Fe alloy fabricated by selective laser melting

Study on Al migration, microstructure and hardness in fusion zone of Al-Si coated press-hardened steel by various laser powers

Laser Transformation Hardening Process and Microstructure and Properties of 780 MPa Grade Micro-alloy Steel

Effect of laser remelting on internal defects and properties of Ni-based coatings reinforced by multi-channel WC in situ

Effect of Multi-Layer Laser Heating on the Microstructure and Microhardness of Laser Hot-Wire Deposited FV520B Steel

Microstructure and Properties of the Carburize-quenched Surface after Laser Alloying

Microstructural evolution in high power laser cladding of Stellite 6+WC layers

Microstructure and Application of Surface after Laser Alloying on Surfacing Layer

Microstructure and Properties of the Carburize-Quenched Surface After Laser Remelting

Thermal behavior and microstructure evolution mechanism of W-20%Fe alloy fabricated by laser metal deposition

Research on Properties of Cr12 Steel Processed by Laser-Remelting

Microstructure Evolution of WC-20Co Cemented Carbide During Direct Selective Laser Melting

Repair of tungsten heavy alloy die casting molds with laser cladded CoCrFeNiWx high entropy alloy Coatings: Microstructure, wear properties and tempering stability

Larger-area Alloying of CSiB+NiMoCo on Carbon Steel by a 45-Kw CO 2 Laser: Effect of Protection Gas on Process and Microstructure

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Effect of the Laser Cladding Parameters on Microstructure and Elevated Temperature Wear of FeCrNiTiZr Coatings

The Effect of Laser Power on the Interface Microstructure of a Laser Remelting Nano-SiC Modified Fe-Based Ni/WC Composite Coating

Effect of laser remelting on the organization and properties of WC/Ni-based coatings generated in situ by laser cladding