Abstract:The goal of the presented investigation was to assess the impact of surface laser modification with the implementation of nickel and chromium on the microstructure and tribological behaviour of grey iron. Surface laser modification consisted of remelting the surface layer with simultaneous implementation of selected elements. In the first variant of treatment only nickel was implemented and in the second one, a combination of nickel with chromium together. This treatment was performed on an agriculture machine part made of grey iron and working in intensive friction conditions. The constituted surface layer was characterized by about 0.45 mm of depth and a 160 mm2 area of the most exposed to wear of the treated part. In the case of both types of variants, the achieved surface layer microstructure was identified as homogenized with small grains. It involved nickel in the first variant of modification and nickel and chromium in the second one. The attained microstructure with nickel addition was characterized by nearly 800 HV0.1 of hardness (a 3.6-fold increase in comparison to its core material). The approximate hardness of 900 HV0.1 was achieved in the case of the microstructure enriched with nickel and chromium (over a 4-fold increase in comparison to the core material). The roughness of the surface after laser modification was reduced (nearly 3-fold) in comparison to the original surface of the part that was characterized by quite substantial coarseness. The wear test showed that Ni and Cr laser coatings increased resistance to abrasive wear resulting from the modification of the microstructure by the formation of martensite and grain fragmentation. Laser modified parts had a 2.5-fold smaller mass loss than untreated parts. Both types of performed variants: with the implementation of nickel and a combination of nickel and chromium gave comparable effects.

Analysis of Laser Surface Hardening of GM246 Cast Iron

Improving the Properties of Gray Cast Iron by Laser Surface Modification

Laser Surface Hardening of Ni-hard White Cast Iron

Study on Laser Surface Hardening Behavior of 42CrMo Press Brake Die

Technique Principle of Laser Hardening Steeland Cast Iron

Laser Melting of Prefabrication AlOOH-Activated Film on the Surface of Nodular Cast Iron and Its Associated Properties

Study on laser surface hardening process of 30CrMnSiNi2A ultra-high strength steel fabricated by laser deposition manufacturing

Surface Hardening of Gears by Laser Beam Processing

On the Efficiency of Laser Alloying of Grey Cast Iron with Tungsten and Silicon Carbides

Microstructure and Soil Wear Resistance of a Grey Cast Iron Alloy Reinforced with Ni and Cr Laser Coatings

A Comparative Study of High-Power Diode Laser and CO2 Laser Surface Hardening of AISI 1045 Steel

Improving the Abrasion Resistance of Nodular Cast Iron Castings by Remelting Their Surfaces by Laser Beam

High-Power Diode Laser Surface Transformation Hardening of Ferrous Alloys

Numerical Optimization and Performance Study of Ni-Based Coatings on Gray Cast Iron Surface by High-Speed Laser Cladding Based on Orthogonal Test

Enhancement of Mechanical Properties and Corrosion Resistance of Cast Iron Alloy Using CO2 Laser Surface Treatment

Microstructure and mechanical properties of composite strengthened high-chromium cast iron by laser quenching and laser shock peening

Laser Transformation Hardening Process and Microstructure and Properties of 780 MPa Grade Micro-alloy Steel

Microstructure Distribution and Grain Coarsening Model of GCr15 Steel in the Laser Surface Treatment

Improving the Wear Properties of AISI4130 Steel Using Laser Surface Hardening Treatment

Laser strengthening of air-cooled diesel engine phosphorus cast iron cylinder liner and its friction & wear properties

Research on Laser Cladding Co-Based Alloy on the Surface of Vermicular Graphite Cast Iron