Abstract:One of the seismic design methods for the steel containment vessel (SCV) of nuclear power plant is established by the Japan Electric Association as JEAC 4601-2015: Technical code for aseismic design of nuclear power plants. The buckling evaluation formulas for SCV in JEAC 4601-2015 are based on a number of buckling test results of various cylinders conducted by NASA (National Aeronautics and Space Administration)(1968) and considered a safety margin. The SCV shall be designed simply and conservatively using the formulas. Recently, the buckling evaluation method using static elasto-plastic buckling analysis has been studied and applied to vessel structures, such as the reactor vessel in fast breeder reactor plant. The elasto-plastic buckling analysis can consider seismic load distributions, openings, initial imperfection of vessel and stress-strain relationship directly in the analysis model, and can evaluate the buckling behavior and buckling load more realistically and reasonably compared to the design formulas. However, the buckling loads calculated by the elasto-plastic analysis are strongly affected by the analysis condition such as material properties, mesh size and initial imperfection shape, and it might be overestimated. In this study, the elasto-plastic buckling analyses for the buckling test of steel cylindrical vessel corresponding to the dimensions of SCV were carried out in various analysis conditions to confirm the sensitivity of buckling load and to establish the analysis procedure and the analysis conditions that can calculate the buckling behavior and buckling load of SCV conservatively and rationally. In addition, to verify the effectiveness of the proposed buckling design method by analysis, the elasto-plastic analyses in accordance with it were conducted for a series of buckling tests of steel vessels with or without stiffening rings. As a result of these analyses, the applicability of the proposed buckling design method by analysis was confirmed.

Elastic-plastic Ratcheting Analysis for Pressure Vessels Based on Elastic Core Evaluation Criterion

A Modification on 3S Criterion and Simplified Elastic-Plastic Ratcheting Analysis in ASME VIII-2

Elastic-plastic Analysis and Riveting Energy Control for Dual-Robot Pneumatic Riveting System

Comparison of design methods for internally pressurized ellipsoidal head

Advances in "design by Analysis" Methods for Pressure Vessels

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Calculations of Plastic Collapse Load of Pressure Vessel Using FEA

Safety analysis of pressure piping containing incomplete penetration under combined loads

Dual Assessment Criterion and Its Programmed Application of Collapse Failure of Pressure Vessels

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Reliability Assessment of Pressure Vessel Design Methods

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

A New Four-Dimensional Ratcheting Boundary: Derivation and Numerical Validation

A Fully Implicit, Lower Bound, Multi-Axial Solution Strategy for Direct Ratchet Boundary Evaluation: Theoretical Development

Elastic Core Concept for Modified Bree Problems Considering In-Phase and Out-of-phase Loading Conditions

Study for the Structural Design of Subsea High Pressure Shell Based on ASME Code

Plastic Analysis Methods for Design by Analysis of Pressure Vessels

Proposal of the buckling design method by elasto-plastic buckling analysis for steel containment vessel of nuclear power plant

A New Pressure Vessel Design by Analysis Method Avoiding Stress Categorization

Defect Assessment for Pressure Vessels Considering Crack Growth and Strain Hardening