Abstract:In recent years, rubber toughened polypropylene (PP) blends have been extensively investigated with special regard to the importance of PP matrix properties (e.g., crystal morphology and structure) in tailoring the toughening efficiency. Unfortunately, although high melt flowability is indispensable to the processing of polymers into complex thin-wall products, it remains a huge challenge to achieve a marvelous balance between stiffness and toughness in the blends with relatively low matrix molecular weight. Herein, taking PP/EPR (ethylene-propylene copolymer) blends as an example, the combined effects of matrix molecular weight and crystallinity on the mechanical properties of PP/EPR blends have been examined in both experiment and theory. The experimental results show that decreasing molecular weight leads to significant deterioration in notched impact toughness, tensile strength and Young's modulus. Impressively, the toughness loss caused by the decrease of molecular weight can be well-compensated by a slight reduction in the matrix crystallinity, without evidently sacrificing the strength and modulus, demonstrating an improved stiffness-toughness balance. Theoretical analysis indicates that the impact toughness of PP/EPR blends is heavily dependent on the chain entanglement density (v e ) of PP matrix, and a linear relationship between critical interparticle distance (ID c ) and the v e 1/3 has been verified from both experiment and theory. Moreover, it is interesting to find that decreasing matrix crystallinity can increase the v e of low-molecular-weight PP matrix, which enables the effective toughening at lower concentration of EPR and thus gives rise to less loss in the strength and modulus. We believe this work not only gives a new insight into the role of chain entanglement in the toughening but also provides a promising guidance for the design of high-performance PP with high melt flowability.

Elastomer Toughened Plastics and Its Affecting Factors

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Toughening Mechanism of Polymer Blends: Influence of Voiding Ability of Dispersed-Phase Particles

Research Progress in the Toughening and Strengthening of Polypropylene Via Inorganic Rigid Particles

A Study on Toughening Epoxy Resin

Combined effects of matrix molecular weight and crystallinity on the impact toughness of PP/EPR blends: The role of chain entanglement

Recent Progress in Toughening Polypropylene

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Study on toughness of PC/elastomer blends based on J-integral method

RESEARCH ADVANCES IN TOUGHENING OF UNSATURATED POLYESTER

Toughness mechanism in polypropylene composites: Polypropylene toughened with elastomer and calcium carbonate

Unsaturated Polyester Toughened with Elastomers

Study of Toughening Mechanism on PVC / ACR Blending System

Toughening Mechanism of Polypropylene Bends with Polymer Particles in Core-Shell Structure: Equivalent Rubber Content Effect Related to Core-Shell Interfacial Strength

Application of Macromolecular Chain Extender and Contribution to the Toughening of Poly(Ethylene Terephthalate)

Comparison of the Toughening Effects of Different Elastomers on Nylon 1010

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Development of Tough Thermoplastic Elastomers by Leveraging Rigid-Flexible Supramolecular Segment Interplays

Toughness Mechanism of Polypropylene/elastomer/filler Composites

SPECIAL EFFECT OF ULTRA-FINE RUBBER PARTICLES ON PLASTIC TOUGHENING

The effect of elastomeric nano-particles on the mechanical properties and crystallization behavior of polypropylene