Abstract:In recent years, rubber toughened polypropylene (PP) blends have been extensively investigated with special regard to the importance of PP matrix properties (e.g., crystal morphology and structure) in tailoring the toughening efficiency. Unfortunately, although high melt flowability is indispensable to the processing of polymers into complex thin-wall products, it remains a huge challenge to achieve a marvelous balance between stiffness and toughness in the blends with relatively low matrix molecular weight. Herein, taking PP/EPR (ethylene-propylene copolymer) blends as an example, the combined effects of matrix molecular weight and crystallinity on the mechanical properties of PP/EPR blends have been examined in both experiment and theory. The experimental results show that decreasing molecular weight leads to significant deterioration in notched impact toughness, tensile strength and Young's modulus. Impressively, the toughness loss caused by the decrease of molecular weight can be well-compensated by a slight reduction in the matrix crystallinity, without evidently sacrificing the strength and modulus, demonstrating an improved stiffness-toughness balance. Theoretical analysis indicates that the impact toughness of PP/EPR blends is heavily dependent on the chain entanglement density (v e ) of PP matrix, and a linear relationship between critical interparticle distance (ID c ) and the v e 1/3 has been verified from both experiment and theory. Moreover, it is interesting to find that decreasing matrix crystallinity can increase the v e of low-molecular-weight PP matrix, which enables the effective toughening at lower concentration of EPR and thus gives rise to less loss in the strength and modulus. We believe this work not only gives a new insight into the role of chain entanglement in the toughening but also provides a promising guidance for the design of high-performance PP with high melt flowability.

Toughening Mechanism of Polymer Blends: Influence of Voiding Ability of Dispersed-Phase Particles

Structure-property Relationships of Reactively Compatibilized PHB/EVA/starch Blends.

Elastomer Toughened Plastics and Its Affecting Factors

Combined effects of matrix molecular weight and crystallinity on the impact toughness of PP/EPR blends: The role of chain entanglement

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Higher order structures and toughening mechanisms for simultaneously polymerized polymethacrylate/polyurethane

Effect of Particle Size on Impact Strength of Polymer Blends

Morphologies, interfacial interaction and mechanical performance of super-tough nanostructured PK/PA6 blends

Toughening Mechanism of Polypropylene Bends with Polymer Particles in Core-Shell Structure: Equivalent Rubber Content Effect Related to Core-Shell Interfacial Strength

Study on Toughening Mechanism of Low Molecular Weight PC/PP Blend

Effect of Core-Shell Particles Dispersed Morphology on the Toughening Behavior of PBT/PC Blends

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Stretch-induced crystalline structural evolution and cavitation of poly(butylene adipate-ran-butylene terephthalate)/poly(lactic acid) immiscible blends

Janus nanoparticles as efficient interface compatibilizer in blends of polylactide and elastomers: Importance of interfacial relaxation on toughening

Toughening Modification of Poly(lactic acid) via Melt Blending

Predicting compatibilized polymer blend toughness

Morphology and Deformation Mechanisms of Polystyrene Low-Density Polyethylene Blends Studied by Tem

Preparation and Properties of PMMA Blends with High Toughness

Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blends

Super Toughened Poly(Lactic Acid) Ternary Blends by Simultaneous Dynamic Vulcanization and Interfacial Compatibilization