Abstract:(A) Effect of various micro‐structure development (scheme images) in EWF‐fracture behavior (FESEM images) of PP/EPDM/SiO2 ternary blend‐nanocomposites, (B) FESEM images taken from the sub‐surface zones of EWF‐fractured specimen of PP/EPDM/SiO2 (One‐step) ternary sample showing the sequence of micromechanical deformations under quasi‐static EWF test. This study investigates the mechanical properties and fracture behavior of polypropylene (PP)‐based blend‐nanocomposites comprising 30 wt.% ethylene–propylene–diene monomer (EPDM) and 5 wt.% SiO2 nanoparticles. Different mixing sequences were employed to prepare the nanocomposites, and the resulting morphology development and dispersion states of modifiers were analyzed. Mechanical performance of the nanocomposites was evaluated through quasi‐static and high‐speed dynamic fracture tests. The dispersion and distribution of SiO2 nanoparticles within the nanocomposites were significantly influenced by the mixing protocol. In impact fracture tests, the presence of nanoparticles exhibited a beneficial efffect on fracture energy, demonstrating a synergistic toughening effect of the soft EPDM and rigid SiO2 particles. Conversely, adverse effects were observed in quasi‐static tests. Essential work of fracture (EWF) parameters indicated an increase in the yielding component and a decrease in the necking‐to‐tearing component with SiO2 incorporation into the PP/EPDM blends. During impact loadings, the highest improvement in crack propagation resistance was observed in nanocomposites with nanoparticles localized around the rubbery domains forming a network‐like structure of EPDM/SiO2‐nanoparticles. Morphologies where rubber domains and nanoparticles were separately distributed in the PP matrix resulted in the lowest fracture parameters. Energy dissipation mechanisms were elucidated, revealing multiple void formation followed by matrix shear yielding as the primary source under both quasi‐static and impact fracture conditions. In the latter case, stress‐concentrating percolated structures in the PP matrix facilitated the nucleation of dilatational bands evolving into highly stretched void‐fibrillar structures upon further loading. These findings contribute valuable insights into tailoring nanocomposite morphologies for enhanced mechanical performance in different loading scenarios. Highlights Fracture behavior of PP/EPDM/SiO2 ternary systems was evaluated by EWF methodology and Izod impact test. Rubber particles surrounded by silica nanoparticles led to a percolated morphology and as a result to superior impact resistance. EWF parameters were mostly controlled by the tearing‐related parts regardless of phase morphology. The impact toughness was mainly controlled by the dispersion and distribution characteristics of the SiO2 nanoparticles.

Higher order structures and toughening mechanisms for simultaneously polymerized polymethacrylate/polyurethane

Morphologies, interfacial interaction and mechanical performance of super-tough nanostructured PK/PA6 blends

Fracture Mechanism Change at a Heterogeneous Polymer-Polymer Interface Reinforced with in Situ Graft Copolymers

Toughening Mechanism of Polymer Blends: Influence of Voiding Ability of Dispersed-Phase Particles

Fracture Behavior of Polyrotaxane-Toughened Poly(Methyl Methacrylate)

Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blends

Preparation and Properties of PMMA Blends with High Toughness

Plastic damage mechanisms of polypropylene/polyamide 6/polyethelene-octene elastomer blends under cyclic tension

Experimental Investigation of Dynamic Fracture Behaviors of Polymethyl Methacrylate

Phase morphology, crystallization behavior and mechanical properties of poly(L-lactide) toughened with biodegradable polyurethane: Effect of composition and hard segment ratio

Molecular Insight into the Toughness of Polyureas: A Hybrid All-Atom/Coarse-Grained Molecular Dynamics Study

Manipulating Crystallization for Simultaneous Improvement of Impact Strength and Heat Resistance of Plasticized Poly(l-lactic acid) and Poly(butylene succinate) Blends

Processing–microstructure–fracture toughness relationships in PP/EPDM/SiO2 blend‐nanocomposites: Effect of mixing sequence

Combined effects of matrix molecular weight and crystallinity on the impact toughness of PP/EPR blends: The role of chain entanglement

Rheology, Mechanical Properties and Crystallization Behavior of Glycidyl Methacrylate Grafted Poly(ethylene Octene) Toughened Poly(lactic Acid) Blends

A toughening mechanism of the strain rate-optimal chain length on the polymer modified calcium silicate hydrates (CSH)

Application of Macromolecular Chain Extender and Contribution to the Toughening of Poly(Ethylene Terephthalate)

Synthesis and evaluation of novel urethane macromonomers for the formulation of fracture tough 3D printable dental materials

Chain microstructure of two in-reactor alloy impact polypropylene resins with same stiffness and different toughness

Morphology and Deformation Mechanisms of Polystyrene Low-Density Polyethylene Blends Studied by Tem

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism