Abstract:The study focuses on the development of polyoxymethylene (POM)/poly(lactic acid) (PLA) blends with increased impact and thermal resistance. The study was conducted in two phases; in the first part, a series of unmodified blends with PLA content of 25, 50, and 75 wt.% was prepared, while the second part focused on the modification of the PLA/POM (50/50) blends. An ethylene/butyl acrylate/glycidyl methacrylate terpolymer (E/BA/GMA) elastomer (EBA) was used to improve the impact strength of the prepared blends, while reactive blending was used to improve interfacial interactions. We used a multifunctional epoxy chain extender (CE) as the compatibilizer. Static tensile tests and notched Izod measurement were used to evaluate the mechanical performance of the prepared samples. The thermomechanical properties were investigated using dynamic mechanical thermal analysis (DMTA) analysis and heat deflection temperature (HDT)/Vicat softening temperature (VST) methods. The crystallinity was measured using differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXS) measurements, while the rheology was evaluated using a rotational rheometer. The paper also includes a structure analysis performed using the SEM method. The structural tests show partial miscibility of the POM/PLA systems, resulting in the perfect compatibility of both phases. The impact properties of the final blends modified by the EBA/CE system were found to be similar to pure POM resin, while the E modulus was visibly improved. Favorable changes were also noticeable in the case of the thermomechanical properties. The results of most of the conducted measurements and microscopic observations confirm the high efficiency of the reaction for PLA as well as for the modified POM/PLA mixtures.

Rheology, Mechanical Properties and Crystallization Behavior of Glycidyl Methacrylate Grafted Poly(ethylene Octene) Toughened Poly(lactic Acid) Blends

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Effect of glycidyl methacrylate-grafted poly(ethylene octene) on the compatibility in PLA/PBAT blends and films

Compatibility and Phase Structure of Binary Blends of Poly(Lactic Acid) and Glycidyl Methacrylate Grafted Poly(Ethylene Octane)

Effect of Mixing Poly(lactic Acid) with Glycidyl Methacrylate Grafted Poly(ethylene Octene) on Optical and Mechanical Properties of the Blown Films

Effect of Ethylene/butyl methacrylate/Glycidyl Methacrylate Terpolymer on toughness and biodegradation of poly (l-lactic acid)

Reactive Processing of Poly(lactic Acid)/poly(ethylene Octene) Blend Film with Tailored Interfacial Intermolecular Entanglement and Toughening Mechanism

Toughening of polylactide with epoxy-functionalized methyl methacrylate–butyl acrylate copolymer

Preparation, Mechanical and Thermal Properties of PLA/PBAT/EGMA Blends

Super-Toughened Poly(lactic Acid) with Poly(ε-caprolactone) and Ethylene-Methyl Acrylate-Glycidyl Methacrylate by Reactive Melt Blending

The Combined Effect of Reactive and High-Shear Extrusion on the Phase Morphologies and Properties of PLA/OBC/EGMA Ternary Blends

Physical and degradation properties of binary or ternary blends composed of poly (lactic acid), thermoplastic starch and GMA grafted POE

In Situ Anionic Polymerization and Mechanical, Thermal and Morphological Properties of Toughened and Volume-Enhanced Blends of Poly(lactic Acid)

Study on Miscibility, Thermal Properties, Degradation Behaviors, and Toughening Mechanism of Poly(lactic Acid)/poly (Ethylene-Butylacrylate-glycidyl Methacrylate) Blends.

Improving the Toughness and Thermal Resistance of Polyoxymethylene/Poly(lactic acid) Blends: Evaluation of Structure-Properties Correlation for Reactive Processing

Thermal and Mechanical Properties of Polylactide Toughened with A Butyl Acrylate-Ethyl Acrylate-Glycidyl Methacrylate Copolymer

A Facile Fabrication Of High Toughness Poly(Lactic Acid) Via Reactive Extrusion With Poly(Butylene Succinate) And Ethylene-Methyl Acrylate-Glycidyl Methacrylate

Morphology, Rheology, Crystallization Behavior, and Mechanical Properties of Poly(lactic Acid)/poly(butylene Succinate)/dicumyl Peroxide Reactive Blends

Effects of preparation and properties of poly(lactic acid) /poly(1,2-propylene glycol adipate) blends

Preparation and Properties of Biodegradable Poly (lactic Acid)/ethylene Butyl Acrylate Glycidyl Methacrylate Blends Via Novel Vane Extruder

Morphology, Mechanical, and Rheological Properties of Poly(lactic Acid)/ethylene Acrylic Acid Copolymer Blends Processing Via Vane Extruder