Abstract:In this paper, we develop high aspect ratio nanofibrils from a polycaprolactone-based thermoplastic polyurethane (TPU) and evaluate their performance as a toughening agent. Poly(methyl methacrylate) (PMMA) was chosen as the matrix material because of its inherent brittleness and low resistance to sudden shocks and impact. We show that the addition of as little as 3 wt % of TPU nanofibrils with an average diameter of ∼98 nm and very high aspect ratio can significantly improve both the tensile toughness (∼212%) and impact strength (∼40%) of the chosen matrix (i.e., PMMA) without compromising its original strength, stiffness, and transparency. We compare the performance of TPU nanofibrils with TPU spherical particles─the form TPU typically manifests into when melt-mixed with an immiscible polymer. Our findings highlight that the structure of TPU plays a crucial role in determining the critical concentration of TPU needed for the brittle-ductile transition of the matrix. We also provide new and valuable insights into the unique interfacial interaction (i.e., formation of fibrillar bridges) observed between the PMMA matrix and TPU. We also show that the inclusion of 3 wt % of TPU nanofibrils can notably enhance resistance to creep deformation, even at temperatures close to the glass transition temperature of the matrix. Finally, we evaluate recyclability and demonstrate that the composite containing 3 wt % of TPU nanofibrils can be mechanically recycled without losing any properties. The proposed TPU nanofibrils can withstand repeated reprocessing at temperatures up to 190 °C due to their very high melting point and thermal stability. This presents the opportunity for them to be utilized not just with amorphous PMMA, but also with a range of other materials that can be processed at or below this temperature to remarkably improve their toughness without sacrificing strength and stiffness.

Fracture Behavior of Polyrotaxane-Toughened Poly(Methyl Methacrylate)

Mechanical and scratch behaviors of polyrotaxane‐modified poly(methyl methacrylate)

Core-Shell Particles Of Poly(Methyl Methacrylate)-Block-Poly(N-Butyl Acrylate) Synthesized Via Reversible Addition-Fragmentation Chain-Transfer Emulsion Polymerization And The Polymer'S Application In Toughening Polycarbonate

Effect of Triaxial Stress Constraint on the Deformation and Fracture of Polymers

Experimental Study of Tensile Properties of PMMA at Intermediate Strain Rate

Higher order structures and toughening mechanisms for simultaneously polymerized polymethacrylate/polyurethane

Poly(n-butyl Methacrylate) End-Capped Polyrotaxanes Via ATRP Initiated with Α-Cyclodextrin and Pluronic 17R4 Based Inclusion Complexes

Experimental Investigation of Dynamic Fracture Behaviors of Polymethyl Methacrylate

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Fracture mechanical behavior of polymers: 1. Amorphous glassy state

Enhancement of Modulus, Strength, and Toughness in Poly(methyl methacrylate)-Based Composites by the Incorporation of Poly(methyl methacrylate)-Functionalized Nanotubes

Mixed-Mode Fracture Investigation of Pmma with Initial Single/Double Crack(S) Interference Using Phase-Shifted Coherent Gradient Sensing Method

Highly Tough Yet Stiff, Transparent, and Recyclable PMMA Nanocomposites Incorporating TPU Nanofibril Networks with High Thermal Stability and Strong Interfacial Adhesion

Effect of Matrix Composition on the Fracture Behavior of Rubber-Modified Pmma/Pvc Blends

Experimental Study of Size Dependence of Fracture Toughness of PMMA

Mechanically Interlocked Polyrotaxane Networks with Collective Motions of Multiple Main‐Chain Mechanical Bonds

Chain microstructure of two in-reactor alloy impact polypropylene resins with same stiffness and different toughness

Tensile and Fracture Behaviors of Pc/Abs Polymer Alloy

Improvement of Polymer Mechanical Behaviors by Introducing [2]rotaxane Units with Intra- and Intermolecular Hydrogen Bonds

Fracture Resistance Improvement of Polypropylene by Joint Action of Core–shell Particles and Nucleating Agent

Effect of Different Surface Treatments as Methods of Improving the Mechanical Properties after Repairs of PMMA for Dentures