Abstract:The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt-mixing through a twin-screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of epsilon-caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic for-in, and crystallization and melting behaviors using polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT-IR) and C-13 solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt-mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T,) for the in situ blends, contrary to an increase of T, with increasing PA66 content for the melt-mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. (c) 2007 Wiley Periodicals, Inc.

Morphologies, interfacial interaction and mechanical performance of super-tough nanostructured PK/PA6 blends

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

STUDY ON TOUGHENING OF PA6/POE-g-MAH/NANO BaSO_4 BLENDS

Highly toughened PA6 using residue of plasticized PVB film via two-step reactive melt blending

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Dynamic Fracture Behaviors Of Polypropylene/Polyamide-6 Blends

Phase Morphology and Performance of Supertough PLA/EMA–GMA/ZrP Nanocomposites Prepared through Reactive Melt-Blending

Higher order structures and toughening mechanisms for simultaneously polymerized polymethacrylate/polyurethane

Toughening Behavior and Morphology Study of PA6/thermal Liquid Crystalline Polyamide Blends

Stable nanoscale sea-island structure of biobased polyamide 56/poly (butylene adipate- co -terephthalate) blends compatibilized by interfacial hyperbranched structure: Toward biobased polymer blends with ultrahigh toughness

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Mechanism and properties of Super-Toughened ternary blends with unique 'Tassel-Bundle' morphology

Fabricating polylactic acid-based blend composite with balanced stiffness−toughness and excellent shape memory performance by incorporating surface-modified carbon nanofibers

Influence of Preparation Methods on Structure and Properties of PA6/PA66 Blends: A Comparison of Melt‐mixing and in Situ Blending

Preparation and Properties of PMMA Blends with High Toughness

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends

Morphology and Mechanical Properties of Nylon 6/PBT Blends Compatibilized with Styrene/Maleic Anhydride Copolymer

Toughening Effects of "Core-Shell" Particles in PA6/SEBS-g-MA/PPO Blends

Creating Super-Tough and Strong PA6/ABS Blends Using Multi-Phase Compatibilizers