Abstract:The plasticized starch exhibits flexible properties, similar to that of elastomer. In this paper, thermoplastic starch acetate (TPAS) and maleic anhydride grafted poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS‐MAH) were used to toughen polypropylene (PP) through melt blending. It is found TPAS and SEBS‐MAH have a synergistic toughening effect on PP, especially the notched impact strength of PP/TPAS/SEBS‐MAH (70/15/15) blend is as high as 83.4 kJ/m2, but only 7.2 kJ/m2 of that for PP/TPAS/SEBS (70/15/15) blend. The structure‐property relationship of the PP/TPAS/SEBS‐MAH blends was investigated. Compared with PP/TPAS/SEBS (70/15/15) blend, the TPAS domains are dispersed homogeneously in the PP/TPAS/SEBS‐MAH (70/15/15) blend with the domain size of TPAS less than 0.2 μm. The incorporation of SEBS‐MAH not only improves the compatibility between PP and TPAS but also facilitates the formation of a core‐shell structure with TPAS as the core and SEBS‐MAH as the shell. Thus formed core‐shell particles play an important role in toughening PP. The spreading coefficient of the multiphase blend reveals that only when the SEBS‐MAH content is higher than TPAS, the core‐shell structure can be formed. Otherwise, TPAS and SEBS‐MAH will disperse separately and the toughness will not be improved. This work provides a new insight into polymer toughening with TPAS. In the case of PP/TPAS/SEBS blends, SEBS and TPAS dispersed separately. For PP/TPAS/SEBS‐MAH blends, the size of TPAS was lower than that of TPAS in the PP/TPAS/SEBS blends at a given content. It indicates the compatibility between PP and TPAS was improved significantly due to the presence of SEBS‐MAH. Only when the content of SEBS‐MAH is not less than TPAS, a core‐shell structure with TPAS as the core and SEBS‐MAH as the shell can be formed, which plays an important role in PP toughening.

Toughening Effects of "Core-Shell" Particles in PA6/SEBS-g-MA/PPO Blends

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Effect of Core-Shell Particles Dispersed Morphology on the Toughening Behavior of PBT/PC Blends

PREPARATION AND CHARACTERISTICS OF PBA/PMMA CORE-SHELL PARTICLES AS TOUGHER

Fabrication and toughening mechanism of high toughness PP/SEBS/HDPE blends with core‐shell particles

Construction of Core‐Shell Structure in PA6/ABS/SEBS Blends for Achieving Stiffness‐Toughness Balance

STUDY ON TOUGHENING OF PA6/POE-g-MAH/NANO BaSO_4 BLENDS

Synergistic toughening of polypropylene by thermoplastic starch acetate and SEBS‐MAH

Toughening of PA6 Nanocomposites by Reactive Acrylonitrile–butadiene–styrene Core–shell Rubber Particles

Inhibited Transesterification on the Properties of Reactive Core-Shell Particles Toughened Poly(Butylene Terephthalate) and Polycarbonate Blends

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Modification of the Reactive Core-Shell Particles Properties to Prepare PBT/PC Blends with Higher Toughness and Stiffness

Core-Shell Particles Of Poly(Methyl Methacrylate)-Block-Poly(N-Butyl Acrylate) Synthesized Via Reversible Addition-Fragmentation Chain-Transfer Emulsion Polymerization And The Polymer'S Application In Toughening Polycarbonate

The influence of extrusion process on micromorphology of PA 6/POE/POE-g-MA ternary blends: A quantitative analysis

The toughening mechanism of core-shell particles by the interface interaction and crystalline transition in polyamide 1012

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends

High-Density Polyethylene-Based Ternary Blends Toughened by PA6/PBT Core–Shell Particles