Abstract:ABSTRACTCompared with poly(butylene terephthalate)/glycidyl methacrylate grafted poly(ethylene–octene) (PBT/POE‐g‐GMA) binary blends, supertough PBT‐based ternary blends with little rigidity loss were successfully obtained by adding rigid polypropylene (PP) into PBT/POE‐g‐GMA blends to construct core–shell particles during melt blending. The effects of PP content and type on the phase morphology and mechanical properties of the blends were systematically investigated. Theoretical predictions and scanning electron microscopy observation showed that a core–shell structure was formed in PBT matrix with PP as the core and POE‐g‐GMA as the shell. The mechanical property tests showed that POE‐g‐GMA and PP had significant synergistic toughening effect. When PP with high melt flow index (H‐PP) was used, PBT/POE‐g‐GMA/H‐PP (70/15/15) blends possessed the highest Izod notched impact strength, which was 1.9‐fold compared with PBT/POE‐g‐GMA (70/30) binary blends, while the tensile performance loss was little. The essential work of fracture tests was performed to evaluate the fracture resistance of different samples. The results demonstrated that PBT/POE‐g‐GMA/PP ternary blends possessed much better resistance to crack propagation than PBT/POE‐g‐GMA binary blends. The decrease of interparticle distance and the fibrillation of core–shell particles activated intense matrix shear yielding, which was the reason for the high crack resistance of ternary blends. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48872.

Inhibited Transesterification on the Properties of Reactive Core-Shell Particles Toughened Poly(Butylene Terephthalate) and Polycarbonate Blends

Effect of Core-Shell Particles Dispersed Morphology on the Toughening Behavior of PBT/PC Blends

Modification of the Reactive Core-Shell Particles Properties to Prepare PBT/PC Blends with Higher Toughness and Stiffness

Synergistic Effect of Polycarbonate on Reactive Core-Shell Particles Toughened Poly (butylene Terephthalate)

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Effect of PBT Resin on the Structure and Properties of Core-Shell Particles Toughened PC

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Toughening of Polylactide with Epoxy-Functionalized Methyl Methacrylate-Butadiene Copolymer

Toughening of PBT/PC Blends with Core-Shell Modifier

Properties of Poly(butylene Terephthalate)/bisphenol A Polycarbonate Blends Toughening with Epoxy-Functionalized Acrylonitrile–Butadiene–Styrene Particles

Core-Shell Particles Of Poly(Methyl Methacrylate)-Block-Poly(N-Butyl Acrylate) Synthesized Via Reversible Addition-Fragmentation Chain-Transfer Emulsion Polymerization And The Polymer'S Application In Toughening Polycarbonate

Effect of Epoxy-Functionalised Core-Shell Particles on Properties of Poly(Butylenes Terephthalate) (Pbt)

Modification of the Core–shell Ratio to Prepare PB-g-(MMA-co-St-co-GMA) Particle-Toughened Poly(butylene Terephthalate) and Polycarbonate Blends with Balanced Stiffness and Toughness

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Fabrication and toughening mechanism of high toughness PP/SEBS/HDPE blends with core‐shell particles

Synergistic Effect of Sbs and Trimethylopropane Trimethacrylate (tmptma) on Dynamically Vulcanized Sebs/Pp Blends

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Effectively toughening polypropylene with in situ formation of core-shell starch-based particles

Modification of Reactive PB‐g‐SAG Core–shell Particles to Achieve Higher Toughening Ability for Brittle Polylactide

Toughening Effects of "Core-Shell" Particles in PA6/SEBS-g-MA/PPO Blends