Abstract:ABSTRACTCompared with poly(butylene terephthalate)/glycidyl methacrylate grafted poly(ethylene–octene) (PBT/POE‐g‐GMA) binary blends, supertough PBT‐based ternary blends with little rigidity loss were successfully obtained by adding rigid polypropylene (PP) into PBT/POE‐g‐GMA blends to construct core–shell particles during melt blending. The effects of PP content and type on the phase morphology and mechanical properties of the blends were systematically investigated. Theoretical predictions and scanning electron microscopy observation showed that a core–shell structure was formed in PBT matrix with PP as the core and POE‐g‐GMA as the shell. The mechanical property tests showed that POE‐g‐GMA and PP had significant synergistic toughening effect. When PP with high melt flow index (H‐PP) was used, PBT/POE‐g‐GMA/H‐PP (70/15/15) blends possessed the highest Izod notched impact strength, which was 1.9‐fold compared with PBT/POE‐g‐GMA (70/30) binary blends, while the tensile performance loss was little. The essential work of fracture tests was performed to evaluate the fracture resistance of different samples. The results demonstrated that PBT/POE‐g‐GMA/PP ternary blends possessed much better resistance to crack propagation than PBT/POE‐g‐GMA binary blends. The decrease of interparticle distance and the fibrillation of core–shell particles activated intense matrix shear yielding, which was the reason for the high crack resistance of ternary blends. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48872.

Toughening of PBT/PC Blends with Core-Shell Modifier

Properties of Poly(butylene Terephthalate)/bisphenol A Polycarbonate Blends Toughening with Epoxy-Functionalized Acrylonitrile–Butadiene–Styrene Particles

Effect of PBT Resin on the Structure and Properties of Core-Shell Particles Toughened PC

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Toughness of ABS/PBT Blends: the Relationship Between Composition, Morphology, and Fracture Behavior

ABS-g-GMA Toughened Poly (butylene terephthalate)

Modification of the Reactive Core-Shell Particles Properties to Prepare PBT/PC Blends with Higher Toughness and Stiffness

Effect of Compatibilizer on the Mechanical Property and Morphostructure of ABS/PBT Blends

Development of ABS/PBT Blend Alloys

Toughening of Poly(butylene Terephthalate) with Epoxy-Functionalized Acrylonitrile–butadiene–styrene

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Effect of Core-Shell Particles Dispersed Morphology on the Toughening Behavior of PBT/PC Blends

Influence of Core-Shell Particles Structure on the Morphology and Brittle-Ductile Transition of Pbt/Abs-G-Gma Blends

Investigation of the Properties of Epoxy-Functionalized Acrylonitrile-butadiene-styrene Toughened Poly (butylene Terephthalate) and Its Blends

Inhibited Transesterification on the Properties of Reactive Core-Shell Particles Toughened Poly(Butylene Terephthalate) and Polycarbonate Blends

Toughening Modification of Poly(Butylene Terephthalate)/Polycarbonate Blends by Poly(Ethylene-Co-Octene)

Synergistic Effect of Polycarbonate on Reactive Core-Shell Particles Toughened Poly (butylene Terephthalate)

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Toughening modification of PBT/PC blends by PTW

Toughening modification of PBT/PC blends with PTW and POE

An investigation on the toughening behavior and morphology of acrylonitrile butadiene styrene/polybutylene terephthalate blends reinforced by carbon nanotubes