Abstract:The particle size of polybutadiene (PB) particles can be effectively controlled through polymer agglomeration. However, up to now, the impact of the particle size and concentration of agglomerated PB on the mechanical properties and rheological behavior of ABS terpolymer remains unclear. Our research described here studied the effect of the particle size and content of agglomerated PB on the mechanical and rheological properties of ABS. It was found that the impact strength of ABS with a bimodal size distribution of PB (67/452 nm) exceeded that of ABS with a unimodal PB size distribution within the PB content range studied. Furthermore, the impact strength of the ABS containing 319 nm PB above the brittle-toughness transition point was greater than that of other ABS containing unimodal PB at the same PB content. For ABS with a unimodal PB distribution, the PB contents of ABS containing 220, 319, and 415 nm PB at the brittle ductile transition point were 14%, 12%, and 16%, respectively. The tensile strength and melting index of the ABS containing different particle sizes of agglomerated PB decreased linearly with the increase of PB content. Rheological tests showed the viscosity and dynamic viscoelastic properties of the ABS blends. All ABS exhibited shear-thinning behavior, and the addition of PB content resulted in more elastic than viscous behavior in the ABS blends. At the same angular frequency (omega), higher PB content corresponded to greater complex viscosity in the ABS blends. In addition, as the PB content in ABS was increased, it exhibited more solid-like behavior. This study, we suggest, provides a good insight into the effect of agglomerated PB on the ABS/PB blend properties and explores practical applications for the polymer agglomeration of polybutadiene latex (PBL).

Influence of Core-Shell Particles Structure on the Morphology and Brittle-Ductile Transition of Pbt/Abs-G-Gma Blends

Effect of Epoxy-Functionalised Core-Shell Particles on Properties of Poly(Butylenes Terephthalate) (Pbt)

ABS-g-GMA Toughened Poly (butylene terephthalate)

Toughening of Poly(butylene Terephthalate) with Epoxy-Functionalized Acrylonitrile–butadiene–styrene

Effect of Core-Shell Particles Dispersed Morphology on the Toughening Behavior of PBT/PC Blends

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Investigation of the Properties of Epoxy-Functionalized Acrylonitrile-butadiene-styrene Toughened Poly (butylene Terephthalate) and Its Blends

Modification of the Reactive Core-Shell Particles Properties to Prepare PBT/PC Blends with Higher Toughness and Stiffness

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Toughening of PBT/PC Blends with Core-Shell Modifier

Properties of Poly(butylene Terephthalate)/bisphenol A Polycarbonate Blends Toughening with Epoxy-Functionalized Acrylonitrile–Butadiene–Styrene Particles

Effect of Interface on Brittle - Ductile Transition and Fracture Behavior of ABS/PA6 Blends

Effect of Reactive Group Types on the Properties of Core-Shell Modifiers Toughened PA6

Compatibilizing and toughening of the styrene and acrylonitrile copolymer and core‐shell impact modifier obtained by agglomerate technologies

Toughness of ABS/PBT Blends: the Relationship Between Composition, Morphology, and Fracture Behavior

Influence of Particle Size and Content of Agglomerated Polybutadiene on Mechanical and Rheological Properties of Acrylonitrile-Butadiene-Styrene Terpolymer

Synergistic Effect of Polycarbonate on Reactive Core-Shell Particles Toughened Poly (butylene Terephthalate)

Effect of Compatibilizer on the Mechanical Property and Morphostructure of ABS/PBT Blends

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Effect of PBT Resin on the Structure and Properties of Core-Shell Particles Toughened PC

Toughening of PA6 Nanocomposites by Reactive Acrylonitrile–butadiene–styrene Core–shell Rubber Particles