Abstract:In recent years, rubber toughened polypropylene (PP) blends have been extensively investigated with special regard to the importance of PP matrix properties (e.g., crystal morphology and structure) in tailoring the toughening efficiency. Unfortunately, although high melt flowability is indispensable to the processing of polymers into complex thin-wall products, it remains a huge challenge to achieve a marvelous balance between stiffness and toughness in the blends with relatively low matrix molecular weight. Herein, taking PP/EPR (ethylene-propylene copolymer) blends as an example, the combined effects of matrix molecular weight and crystallinity on the mechanical properties of PP/EPR blends have been examined in both experiment and theory. The experimental results show that decreasing molecular weight leads to significant deterioration in notched impact toughness, tensile strength and Young's modulus. Impressively, the toughness loss caused by the decrease of molecular weight can be well-compensated by a slight reduction in the matrix crystallinity, without evidently sacrificing the strength and modulus, demonstrating an improved stiffness-toughness balance. Theoretical analysis indicates that the impact toughness of PP/EPR blends is heavily dependent on the chain entanglement density (v e ) of PP matrix, and a linear relationship between critical interparticle distance (ID c ) and the v e 1/3 has been verified from both experiment and theory. Moreover, it is interesting to find that decreasing matrix crystallinity can increase the v e of low-molecular-weight PP matrix, which enables the effective toughening at lower concentration of EPR and thus gives rise to less loss in the strength and modulus. We believe this work not only gives a new insight into the role of chain entanglement in the toughening but also provides a promising guidance for the design of high-performance PP with high melt flowability.

Study on toughness of PC/elastomer blends based on J-integral method

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Investigation of Toughening Mechanisms in Elastomeric Polycarbonate Blends through Morphological and Mechanical Characterization at Small and Medium Strain Rates

Comparison of the Toughening Effects of Different Elastomers on Nylon 1010

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Study on Toughening Mechanism of Low Molecular Weight PC/PP Blend

Toughening PET/PC Blends with Ethylene-propylene-diene Rubber

Fracture toughness and fracture mechanisms of PBT/PC/IM blends: Part V Effect of PBT-PC interfacial strength on the fracture and tensile properties of the PBT/PC blends

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Elastomer Toughened Plastics and Its Affecting Factors

Toughening of PBT/PC Blends with Core-Shell Modifier

Toughening Behavior and Morphology Study of PA6/thermal Liquid Crystalline Polyamide Blends

Fracture Toughness and Fracture Mechanisms of PBT/PC/IM Blends PART IV Impact Toughness and Failure Mechanisms of PBT/PC Blends Without Impact Modifier

Combined effects of matrix molecular weight and crystallinity on the impact toughness of PP/EPR blends: The role of chain entanglement

Effect of Core-Shell Particles Dispersed Morphology on the Toughening Behavior of PBT/PC Blends

Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blends

Toughness mechanism in polypropylene composites: Polypropylene toughened with elastomer and calcium carbonate

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Brittle-tough transition in PP/EPDM blends: effects of interparticle distance and temperature

Toughening of Poly(ethylene Terephthalate) and Optimizing of the Compatibilization Between PET and EPDM by Functionalized EPDM

Janus nanoparticles as efficient interface compatibilizer in blends of polylactide and elastomers: Importance of interfacial relaxation on toughening