Abstract:In recent years, rubber toughened polypropylene (PP) blends have been extensively investigated with special regard to the importance of PP matrix properties (e.g., crystal morphology and structure) in tailoring the toughening efficiency. Unfortunately, although high melt flowability is indispensable to the processing of polymers into complex thin-wall products, it remains a huge challenge to achieve a marvelous balance between stiffness and toughness in the blends with relatively low matrix molecular weight. Herein, taking PP/EPR (ethylene-propylene copolymer) blends as an example, the combined effects of matrix molecular weight and crystallinity on the mechanical properties of PP/EPR blends have been examined in both experiment and theory. The experimental results show that decreasing molecular weight leads to significant deterioration in notched impact toughness, tensile strength and Young's modulus. Impressively, the toughness loss caused by the decrease of molecular weight can be well-compensated by a slight reduction in the matrix crystallinity, without evidently sacrificing the strength and modulus, demonstrating an improved stiffness-toughness balance. Theoretical analysis indicates that the impact toughness of PP/EPR blends is heavily dependent on the chain entanglement density (v e ) of PP matrix, and a linear relationship between critical interparticle distance (ID c ) and the v e 1/3 has been verified from both experiment and theory. Moreover, it is interesting to find that decreasing matrix crystallinity can increase the v e of low-molecular-weight PP matrix, which enables the effective toughening at lower concentration of EPR and thus gives rise to less loss in the strength and modulus. We believe this work not only gives a new insight into the role of chain entanglement in the toughening but also provides a promising guidance for the design of high-performance PP with high melt flowability.

Brittle-tough transition in PP/EPDM blends: effects of interparticle distance and temperature

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Combined effects of matrix molecular weight and crystallinity on the impact toughness of PP/EPR blends: The role of chain entanglement

Interparticle Distance-Temperature-strain Rate Equivalence for the Brittle-Tough Transition in Polymer Blends

Toughening Mechanism of PP/EPR/SiO2 Composites with Superior Low-Temperature Toughness

A New Approach to Fabricate Polypropylene Alloy with Excellent Low-Temperature Toughness and Balanced Toughness-Rigidity Through Unmatched Thermal Expansion Coefficients Between Components

Effect Of Gamma-Irradiation On Brittle-Tough Transition Of Pbt/Epdm Blends

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Ductile–brittle transition controlled by isothermal crystallization of isotactic polypropylene and its blend with poly(ethylene-co-octene)

Mechanical properties and structural characteristics of dynamically photocrosslinked PP/EPDM blends

Study on Toughening Mechanism of Low Molecular Weight PC/PP Blend

Ppr/Epdm/Poe-G-Ma/Ommt Nanocomposites with Superior Low-Temperature Toughness Based on Embedded Ommt Within Compound Rubber Dispersion Phase

Dynamically photocrosslinking of polypropylene/EPDM blends as a thermoplastic elastomer

Effects of Reactive Blending Temperature on Impact Toughness of Poly(Lactic Acid) Ternary Blends

Fabrication Of Polypropylene Blends With Excellent Low-Temperature Toughness And Balanced Toughness-Rigidity By A Combination Of Epr And Seeps

Brittle-ductile transition of elastomer toughened HDPE: effect of elastomer modulus

A facile fabrication of polypropylene composites with excellent low-temperature toughness through tuning interfacial area between matrix and rubber dispersion by silica nanoparticles located at the interface

Toughening Mechanism of Polypropylene Bends with Polymer Particles in Core-Shell Structure: Equivalent Rubber Content Effect Related to Core-Shell Interfacial Strength

Toughening with Little Rigidity Loss and Mechanism for Modified Polypropylene by Polymer Particles with Core–shell Structure

Adjustable brittle-ductile transition behavior and rheological behavior of polypropylene random copolymer nanocomposites through well interfacial-loaded nanoparticles