Abstract:(A) Effect of various micro‐structure development (scheme images) in EWF‐fracture behavior (FESEM images) of PP/EPDM/SiO2 ternary blend‐nanocomposites, (B) FESEM images taken from the sub‐surface zones of EWF‐fractured specimen of PP/EPDM/SiO2 (One‐step) ternary sample showing the sequence of micromechanical deformations under quasi‐static EWF test. This study investigates the mechanical properties and fracture behavior of polypropylene (PP)‐based blend‐nanocomposites comprising 30 wt.% ethylene–propylene–diene monomer (EPDM) and 5 wt.% SiO2 nanoparticles. Different mixing sequences were employed to prepare the nanocomposites, and the resulting morphology development and dispersion states of modifiers were analyzed. Mechanical performance of the nanocomposites was evaluated through quasi‐static and high‐speed dynamic fracture tests. The dispersion and distribution of SiO2 nanoparticles within the nanocomposites were significantly influenced by the mixing protocol. In impact fracture tests, the presence of nanoparticles exhibited a beneficial efffect on fracture energy, demonstrating a synergistic toughening effect of the soft EPDM and rigid SiO2 particles. Conversely, adverse effects were observed in quasi‐static tests. Essential work of fracture (EWF) parameters indicated an increase in the yielding component and a decrease in the necking‐to‐tearing component with SiO2 incorporation into the PP/EPDM blends. During impact loadings, the highest improvement in crack propagation resistance was observed in nanocomposites with nanoparticles localized around the rubbery domains forming a network‐like structure of EPDM/SiO2‐nanoparticles. Morphologies where rubber domains and nanoparticles were separately distributed in the PP matrix resulted in the lowest fracture parameters. Energy dissipation mechanisms were elucidated, revealing multiple void formation followed by matrix shear yielding as the primary source under both quasi‐static and impact fracture conditions. In the latter case, stress‐concentrating percolated structures in the PP matrix facilitated the nucleation of dilatational bands evolving into highly stretched void‐fibrillar structures upon further loading. These findings contribute valuable insights into tailoring nanocomposite morphologies for enhanced mechanical performance in different loading scenarios. Highlights Fracture behavior of PP/EPDM/SiO2 ternary systems was evaluated by EWF methodology and Izod impact test. Rubber particles surrounded by silica nanoparticles led to a percolated morphology and as a result to superior impact resistance. EWF parameters were mostly controlled by the tearing‐related parts regardless of phase morphology. The impact toughness was mainly controlled by the dispersion and distribution characteristics of the SiO2 nanoparticles.

Adjustable brittle-ductile transition behavior and rheological behavior of polypropylene random copolymer nanocomposites through well interfacial-loaded nanoparticles

Regulation of Structure and Mechanical Properties of Poly(propylene-Butene) Alloys by Monomer Composition Switching

Ultra-high impact PPR composites at low-temperature through enhanced preferential loading of nanoparticles at polymeric interface induced by properly vulcanized rubber dispersed phase

Synergistic Effect of Compound Rubber and SiO2 Nanoparticles on Low-Temperature Toughening and Balanced Stiffness-Toughness of Random Copolymer Polypropylene Nanocomposites

Synergistic effect of compound rubber and SiO 2 nanoparticles on low-temperature toughening and balanced stiffness-toughness of random copolymer polypropylene nanocomposites

Toughening Mechanism of PP/EPR/SiO2 Composites with Superior Low-Temperature Toughness

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

A facile fabrication of polypropylene composites with excellent low-temperature toughness through tuning interfacial area between matrix and rubber dispersion by silica nanoparticles located at the interface

Ppr/Epdm/Poe-G-Ma/Ommt Nanocomposites with Superior Low-Temperature Toughness Based on Embedded Ommt Within Compound Rubber Dispersion Phase

The effect of elastomeric nano-particles on the mechanical properties and crystallization behavior of polypropylene

Study on Low Temperature Toughness and Crystallization Behavior of Polypropylene Random Copolymer

Toughening with Little Rigidity Loss and Mechanism for Modified Polypropylene by Polymer Particles with Core–shell Structure

Processing–microstructure–fracture toughness relationships in PP/EPDM/SiO2 blend‐nanocomposites: Effect of mixing sequence

A New Approach to Fabricate Polypropylene Alloy with Excellent Low-Temperature Toughness and Balanced Toughness-Rigidity Through Unmatched Thermal Expansion Coefficients Between Components

Synergistic Toughening Effect of Olefin Block Copolymer and Highly Effective Β-Nucleating Agent on the Low-Temperature Toughness of Polypropylene Random Copolymer

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Reinforced-Toughened by Styrene–butadiene Rubber and Graphene Oxide Nanosheets

Toughening Mechanism of Polypropylene Bends with Polymer Particles in Core-Shell Structure: Equivalent Rubber Content Effect Related to Core-Shell Interfacial Strength

Fabrication Of Polypropylene Blends With Excellent Low-Temperature Toughness And Balanced Toughness-Rigidity By A Combination Of Epr And Seeps

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Filled by Styrene‐butadiene Rubber and Silica Nanoparticles

Investigation of Crystallization, Morphology, and Mechanical Properties of Polypropylene/Polypropylene-Polyethylene Block Copolymer Blends

Effect of hydrophobic nano‐silica/β‐nucleating agents on the crystallization behavior and mechanical properties of polypropylene random copolymers