Abstract:The improvement of mechanical properties of high-density polyethylene (HDPE) and polypropylene (PP) blends was studied by controlling the phase compatibility versus phase separation. In the original injection molding processes,super mechanical properties of blend specimens-have not been got easily. Researches have been carried out in injection molding with high shear injection conditions. It has been pointed out that the compatibility of blends will increase under the strong shear in injection processes due to the raise of LCST curve. After the melt is injected into the cold mold, its temperature and compatibility decrease simultaneously, phase separation takes place and becomes frozen in the specimen. High mechanical properties will be got when the phase separation develope to some extent, but it is difficult to control the phase compatibility and separation. The special method of oscillating packing injection molding under low pressure provides a condition to control the phase separation degree. Because the phase morphology and crystal morphology of HDPE/PP blends compete with each other, it is difficult to control the micro-phase separation. In this paper, the fine structure combined with the micro-phase separation and orientation were controlled by using that special injection method and high strength and high toughness blends were obtained. DSC and WAXD results indicate that the improvement of tensile strength is dependent on the number of shish-kebab crystals and the degree of macromolecule orientation caused by the oscillating packing injection molding. SEM results indicate that the impact strength is dependent on the degree of macro- and micro-phase separation. The high tensile strength 97.1MPa and high toughness 45.5kJ/m(2) of HDPE/PP blends were achieved when the PP content in the blends was 8 % and 20 %, respectively. Which are 4.3 times and 9.5 times as high as the corresponding values of their static specimens respectively. The future work will be carried out to investigate the phase morphology and crystal morphology as well as the possibility of cocrystallization of PP and HDPE under oscillating packing injection conditions.

Investigation of Crystallization, Morphology, and Mechanical Properties of Polypropylene/Polypropylene-Polyethylene Block Copolymer Blends

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Study on Low Temperature Toughness and Crystallization Behavior of Polypropylene Random Copolymer

Crystallization Behavior of the Blends of Isotactic Polypropylene and Ethylene-Propylene Blocky Copolymers

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

Compatibility evaluation and mechanical properties of isotactic polypropylene/high density polyethylene (iPP/HDPE) blends

Relationship Between Mechanical Properties and Crystalline Structure of PPR/iPP Blends Modified with β-Nucleator

Fabrication Of Polypropylene Blends With Excellent Low-Temperature Toughness And Balanced Toughness-Rigidity By A Combination Of Epr And Seeps

Rheological Properties and Morphological Evolutions of Polypropylene/Ethylene-Butene Copolymer Blends

Preparation, Non-Isothermal Crystallization, and Melting Behavior of Β-Nucleated Isotactic Polypropylene/poly (ethylene Terephthalate) Blends

The High Mechanical Properties and Micro-Phase Separation of High Density Polyethylene and Polypropylene Blends

Effect of Microstructure of Epr on Crystallization and Morphology of Pp/Epr Blends

Dynamic rheological behavior, crystallization and friction performance of ultrahigh molecular weight polyethylene/polypropylene blends by multi-step melt processing strategy

Combined effects of matrix molecular weight and crystallinity on the impact toughness of PP/EPR blends: The role of chain entanglement

Brittle-ductile transition behavior of the polypropylene/ultra-high molecular weight polyethylene/olefin block copolymers ternary blends: Dispersion and interface design

Relationship between Microstructure and Mechanical Properties of Ethylene-Octene Copolymer Reinforced and Toughened PP

A New Approach to Fabricate Polypropylene Alloy with Excellent Low-Temperature Toughness and Balanced Toughness-Rigidity Through Unmatched Thermal Expansion Coefficients Between Components

Study on synergistic toughening of polypropylene with high-density polyethylene and elastomer-olefin block copolymers under ultrasonic application

A study on the mechanical, thermal properties and crystallization behavior of poly(lactic acid)/thermoplastic poly(propylene carbonate) polyurethane blends

The effect of elastomeric nano-particles on the mechanical properties and crystallization behavior of polypropylene

Injection molding shrinkage and mechanical properties of polypropylene blends