Abstract:Ethylene/propylene-random-copolymer (PPR)/clay nanocomposites were prepared by two-stage melt blending. Four types of compatibilizers, including an ethylene-octene copolymer grafted maleic anhydride (POE-g-MA) and three maleic-anhydride-grafted polypropylenes (PP-g-MA) with different melt flow indexes (MFI), were used to improve the dispersion of organic clay in matrix. On the other hand, the effects of organic montmorillonite (OMMT) content on the nanocomposite structure in terms of clay dispersion in PPR matrix, thermal behavior and tensile properties were also studied. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results show that the organic clay layers are mainly intercalated and partially exfoliated in the nanocomposites. Moreover, a PP-g-MA compatibilizer (compatibilizer B) having high MFI can greatly increase the interlayer spacing of the clay as compared with other compatibilizers. With the introduction of compatibilizer D (POE-g-MA), most of the clays are dispersed into the POE phase, and the shape of the dispersed OMMT appears elliptic, which differs from the strip of PP-g-MA. Compared with virgin PPR, the Young’s modulus of the nanocomposite evidently increases when a compatibilizer C (PP-g-MA) with medium MFI is used. For the nanocomposites with compatibilizer B and C, their crystallinities (X c) increase as compared with that of the virgin PPR. Furthermore, the increase of OMMT loadings presents little effect on the melt temperature (T m) of the PPR/OMMT nanocomposites, and slight effect on their crystallization temperature (T c). Only compatibilizer B can lead to a marked increases in crystallinity and T c of the nanocomposite when the OMMT content is 2 wt%.

Ppr/Epdm/Poe-G-Ma/Ommt Nanocomposites with Superior Low-Temperature Toughness Based on Embedded Ommt Within Compound Rubber Dispersion Phase

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Ultra-high impact PPR composites at low-temperature through enhanced preferential loading of nanoparticles at polymeric interface induced by properly vulcanized rubber dispersed phase

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Adjustable brittle-ductile transition behavior and rheological behavior of polypropylene random copolymer nanocomposites through well interfacial-loaded nanoparticles

A facile fabrication of polypropylene composites with excellent low-temperature toughness through tuning interfacial area between matrix and rubber dispersion by silica nanoparticles located at the interface

Preparation and Properties of Ethylene–propylene–diene Rubber/organomontmorillonite Nanocomposites

Polypropylene/Ethylene-Octene Copolymer/Organic-Montmorillonite Nanocomposites

Toughening Mechanism of PP/EPR/SiO2 Composites with Superior Low-Temperature Toughness

Synergistic Effect of Compound Rubber and SiO2 Nanoparticles on Low-Temperature Toughening and Balanced Stiffness-Toughness of Random Copolymer Polypropylene Nanocomposites

Study of Nanocomposites Prepared by Melt Blending Tpu and Montmorillonite

Study on mechanical and ablative properties of EPDM/OMMT thermal insulating nanocomposites.

Rheological Behavior of Polypropylene/Organic Montmorillonite Nanocomposite

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Toughened Nylon66/Nylon6 Ternary Nanocomposites By Elastomers

Preparation and Properties of Semi-Transparent EPDM/Montmorillonite Nanocomposites

Synergistic Toughening Effect of Olefin Block Copolymer and Highly Effective Β-Nucleating Agent on the Low-Temperature Toughness of Polypropylene Random Copolymer

Synergistic effect of compound rubber and SiO 2 nanoparticles on low-temperature toughening and balanced stiffness-toughness of random copolymer polypropylene nanocomposites

Effect of Multi-Monomer Grafted Polyolefin Elastomer/Polypropylene on the Structure and Properties of Polypropylene/Montmorillonite Nanocomposites

TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES： COMPARISON OF DIFFERENT COMPATIBILIZERS