Abstract:The toughening effect of styrene–butadiene rubber (SBR) rubber and the reinforcing effect of silicon carbide (SiC) nanoparticles on mechanical properties and microstructure of PP/SBR/SIC composites was investigated. Polypropylene is a useful and widely consumed thermoplastic with very good properties that can be mixed with a combination of rubber and nanoparticles in order to eliminate its shortcomings. In this paper, the simultaneous combination of both the toughening effect of styrene–butadiene rubber (SBR) and the reinforcing effect of silicon carbide (SiC) nanoparticles were investigated in polypropylene matrix. Mechanical properties (tensile and impact strength [TS and IS]) of compounds were analyzed using the central composite design approach in Design‐Expert software. With two factors for input variables of SBR and SiC weight percentages, and their five levels (5, 10, 15, 20, and 25) and (0, 1.5, 3, 4.5, and 6), respectively, the central composite design approach employs 11 experiments for creation of models and the analysis of variance investigations with two output responses of TS and IS. Statistical results revealed that SBR and SiC contents had a significant effect on TS, IS, and the microstructure of compounds, as confirmed by scanning electron microscopy and energy‐dispersive spectroscopy images. To maximize all mechanical properties simultaneously with desirability functions, TS and IS of the optimum sample were computed to be 21.98 MPa and 8.66 kJ/m2 in amounts of 13.45 and 2.80 weight percentage (wt%) of SBR and SiC, respectively. Highlights By increasing silicon carbide (SiC) in polypropylene/styrene–butadiene rubber (SBR), tensile strength decreases after a peak due to agglomeration effect. By increasing SiC in polypropylene/SBR, impact strength decreases after a peak due to agglomeration effect. By increasing SiC, the rubber particles' dimensions decrease according to scanning electron microscopy analysis. Simultaneous maximum of tensile strength and impact strength are 21.98 MPa and 8.66 KJ/m2, respectively. Optimum value of SBR and SiC in above maximums are 13.45 and 2.8 wt%, respectively.

Synergistic effect of compound rubber and SiO 2 nanoparticles on low-temperature toughening and balanced stiffness-toughness of random copolymer polypropylene nanocomposites

Synergistic Effect of Compound Rubber and SiO2 Nanoparticles on Low-Temperature Toughening and Balanced Stiffness-Toughness of Random Copolymer Polypropylene Nanocomposites

Adjustable brittle-ductile transition behavior and rheological behavior of polypropylene random copolymer nanocomposites through well interfacial-loaded nanoparticles

Ultra-high impact PPR composites at low-temperature through enhanced preferential loading of nanoparticles at polymeric interface induced by properly vulcanized rubber dispersed phase

The optimization of mechanical properties of polypropylene/styrene butadiene rubber/silicon carbide nanocomposites using response surface methodology

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

A facile fabrication of polypropylene composites with excellent low-temperature toughness through tuning interfacial area between matrix and rubber dispersion by silica nanoparticles located at the interface

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Filled by Styrene‐butadiene Rubber and Silica Nanoparticles

Toughening Mechanism of PP/EPR/SiO2 Composites with Superior Low-Temperature Toughness

Simultaneously Toughening and Reinforcing Polylactide by Regulating the Distribution of Core–Shell Rubber Particles with Carbon Black

Ethylene-Propylene-Methylene/Isoprene Rubber/SiO2 Nanocomposites with Enhanced Mechanical Performances and Deformation Recovery Ability by a Combination of Synchronously Vulcanizing and Nanoparticle Reinforcement

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Reinforced-Toughened by Styrene–butadiene Rubber and Graphene Oxide Nanosheets

Study on the phase structures and toughening mechanism in PP/EPDM/SiO2 ternary composites

Toughening of Polypropylene by Combined Rubber System of Ultrafine Full-Vulcanized Powdered Rubber and SBS

Toughening Polypropylene with Nanoscale Rubber Particles

Synergistic Toughening Effect of Olefin Block Copolymer and Highly Effective Β-Nucleating Agent on the Low-Temperature Toughness of Polypropylene Random Copolymer

Synergetic Toughening Effect of Carbon Nanotubes and Β-Nucleating Agents on the Polypropylene Random Copolymer/Styrene-Ethylene-Butylene- Styrene Block Copolymer Blends.

Toughening with Little Rigidity Loss and Mechanism for Modified Polypropylene by Polymer Particles with Core–shell Structure

Realization of Reinforcing and Toughening Poly (phenylene Sulfide) with Rigid Silica Nanoparticles

The Relationship between Microstructure and Properties in PP/Rubber Powder/nano-CaCO3 Ternary Blends

Fabrication Of Polypropylene Blends With Excellent Low-Temperature Toughness And Balanced Toughness-Rigidity By A Combination Of Epr And Seeps