Abstract:A modified nano-calcium carbonate (R-CCR) was prepared by coating a layer of unsaturated hydroxylfatty acid on the surface of CCR powders using a solid state method; the latter were commercial nano-CaCO 3 modified with stearic acid. FTIR studies indicate that the modifier is combined on the surface of CaCO 3 . PP/EPDM/nano-CaCO 3 ternary composites were prepared by a melt-mixing method. SEM and TEM were utilized to examine the morphology of the composites. The tensile fractured surface of PP/EPDM/R-CCR showed a fibroid morphology and large-scale yield deformation. The impact fractured surface showed that the amount of cavities in the PP/EPDM/R-CCR system was increased, however their size diminished obviously. R-CCR particles were dispersed uniformly in the PP matrix, and their compatibility was distinctly improved as compared to CCR when the amount of R-CCR was 15 h −1 . The tensile strength remained nearly constant (reduced from 27.6 MPa to 27.5 MPa), while the impact strength increased from 9.6 kJ/m 2 to 15.4 kJ/m 2 as CCR was replaced by R-CCR. Meanwhile, the bending strength and bending modulus also increased correspondingly. Furthermore, the impact strength of PP/EPDM/R-CCR was maintained at a high level (15.4 kJ/m 2 ), which was more than the sum of that of PP/EPDM and PP/R-CCR (6.6 kJ/m 2 and 6.1 kJ/m 2 respectively). This indicates that the R-CCR and EPDM have a significant synergistic toughening effect on PP while maintaining the strength and modulus of virgin PP. Both the storage modulus G′ and loss modulus G″ of PP/EPDM and PP/EPDM/R-CCR composites increase with increasing frequency, but the values of G′ and G″ of the tertiary composite are relatively higher than those of the binary system. The loss factor and viscosity decrease with increasing frequency, but there is little difference between tertiary and binary composites. The apparent viscosity η of the tertiary system containing R-CCR is lower than that of the tertiary system containing CCR and virgin PP. The viscosity of the composites sig-nificantly decreases with increasing shear rate. The mea-sured mechanical properties of the composites indicate that replacing CCR with R-CCR for binary composites could simultaneously enhance the toughness and strength of PP.

The Relationship between Microstructure and Properties in PP/Rubber Powder/nano-CaCO3 Ternary Blends

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Synergistic Effect of Compound Rubber and SiO2 Nanoparticles on Low-Temperature Toughening and Balanced Stiffness-Toughness of Random Copolymer Polypropylene Nanocomposites

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Reinforced-Toughened by Styrene–butadiene Rubber and Graphene Oxide Nanosheets

Toughening of Polypropylene by Combined Rubber System of Ultrafine Full-Vulcanized Powdered Rubber and SBS

Synergistic effect of compound rubber and SiO 2 nanoparticles on low-temperature toughening and balanced stiffness-toughness of random copolymer polypropylene nanocomposites

Effect of Unsaturated Hydroxyl-Fatty Acid Modified Nano-Caco3 on the Morphological and Rheological Behavior of PP

Toughening Polypropylene with Nanoscale Rubber Particles

Influence of the structure of sub‐micrometer core‐shell rubber particles and matrix composition on the mechanical properties, morphological structure and deformation mechanism of rubber‐modified polyphenylene oxide/polystyrene blends

Structure and Properties of Modified Rubber Powder/Natural Rubber Blends

In-situ SiO2 Hybrid Modification of Rubber Powder and Its Application in PP

The effect of elastomeric nano-particles on the mechanical properties and crystallization behavior of polypropylene

Structure And Mechanical Properties Controlling Of Elastomer Modified Polypropylene By Compounded Beta/Alpha Nucleating Agents

Crystallization Behavior of PP in Composites with EPDM and a Surface Modified Nano-Calcium Carbonate

Mechanical Properties Of Pp/Epdm/Nano-Sio2 Ternary Composites

Balanced toughening and strengthening of ethylene–propylene rubber toughened isotactic polypropylene using a poly(styrene-b-ethylene–propylene) diblock copolymer

Relationship Between Mechanical Properties and Crystalline Structure of PPR/iPP Blends Modified with β-Nucleator

Synergistic Toughening of Iso‐polypropylene with High‐density Polyethylene and Polycyclooctene Synthesized by ROMP

Study on the Cooperative Toughening of Dynamic Vulcanized PP/EPDM/nano-SiO2 Composites with Double Particles

Ultra-high impact PPR composites at low-temperature through enhanced preferential loading of nanoparticles at polymeric interface induced by properly vulcanized rubber dispersed phase