Abstract:(A) Effect of various micro‐structure development (scheme images) in EWF‐fracture behavior (FESEM images) of PP/EPDM/SiO2 ternary blend‐nanocomposites, (B) FESEM images taken from the sub‐surface zones of EWF‐fractured specimen of PP/EPDM/SiO2 (One‐step) ternary sample showing the sequence of micromechanical deformations under quasi‐static EWF test. This study investigates the mechanical properties and fracture behavior of polypropylene (PP)‐based blend‐nanocomposites comprising 30 wt.% ethylene–propylene–diene monomer (EPDM) and 5 wt.% SiO2 nanoparticles. Different mixing sequences were employed to prepare the nanocomposites, and the resulting morphology development and dispersion states of modifiers were analyzed. Mechanical performance of the nanocomposites was evaluated through quasi‐static and high‐speed dynamic fracture tests. The dispersion and distribution of SiO2 nanoparticles within the nanocomposites were significantly influenced by the mixing protocol. In impact fracture tests, the presence of nanoparticles exhibited a beneficial efffect on fracture energy, demonstrating a synergistic toughening effect of the soft EPDM and rigid SiO2 particles. Conversely, adverse effects were observed in quasi‐static tests. Essential work of fracture (EWF) parameters indicated an increase in the yielding component and a decrease in the necking‐to‐tearing component with SiO2 incorporation into the PP/EPDM blends. During impact loadings, the highest improvement in crack propagation resistance was observed in nanocomposites with nanoparticles localized around the rubbery domains forming a network‐like structure of EPDM/SiO2‐nanoparticles. Morphologies where rubber domains and nanoparticles were separately distributed in the PP matrix resulted in the lowest fracture parameters. Energy dissipation mechanisms were elucidated, revealing multiple void formation followed by matrix shear yielding as the primary source under both quasi‐static and impact fracture conditions. In the latter case, stress‐concentrating percolated structures in the PP matrix facilitated the nucleation of dilatational bands evolving into highly stretched void‐fibrillar structures upon further loading. These findings contribute valuable insights into tailoring nanocomposite morphologies for enhanced mechanical performance in different loading scenarios. Highlights Fracture behavior of PP/EPDM/SiO2 ternary systems was evaluated by EWF methodology and Izod impact test. Rubber particles surrounded by silica nanoparticles led to a percolated morphology and as a result to superior impact resistance. EWF parameters were mostly controlled by the tearing‐related parts regardless of phase morphology. The impact toughness was mainly controlled by the dispersion and distribution characteristics of the SiO2 nanoparticles.

Role of interfacial compatibilizer and functionality of rubber phase on micromorphology development and mechanical properties of PP/EPDM/nanosilica ternary nanocomposite

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Processing–microstructure–fracture toughness relationships in PP/EPDM/SiO2 blend‐nanocomposites: Effect of mixing sequence

Silicone rubber/benzoxazine resin‐based nanocomposites: A study on compatibility and thermal stability

The effect of silane‐modified carbon black and nano‐silica, individually and in combination, on the performance of ethylene–propylene–diene monomer rubber

Morphology and viscoelastic behavior of silicone rubber/EPDM/Cloisite 15A nanocomposites based on Maxwell model

Nanosilica reinforced EPDM silicone rubber blends: Experimental and theoretical evaluation of mechanical and solvent sorption properties

Influences of Compatibilizers on Rheology and Mechanical Properties of Propylene Random Copolymer/styrene‐ethylene‐butylene‐styrene Block Copolymer/organic‐montmorillonite Nanocomposites

Synergistic Effect of Compound Rubber and SiO2 Nanoparticles on Low-Temperature Toughening and Balanced Stiffness-Toughness of Random Copolymer Polypropylene Nanocomposites

Investigation on the mechanical, thermal, structural and morphological properties of polypropylene/ethylene-vinyl acetate copolymer/graphene oxide nanocomposites: effect of nanofiller surface functionalization and compatibilizers

Mechanical Properties Of Pp/Epdm/Nano-Sio2 Ternary Composites

Influence of Modified Nanosilica on the Performance of NR/EPDM Blends: Cure Characteristics, Mechanical Properties and Swelling Resistance

Synergistic effect of compound rubber and SiO 2 nanoparticles on low-temperature toughening and balanced stiffness-toughness of random copolymer polypropylene nanocomposites

Morphology Development and Superior Mechanical Properties of Pp/Pa6/Sebs Ternary Blends Compatibilized by Using A Highly Efficient Multi-Phase Compatibilizer

The optimization of mechanical properties of polypropylene/styrene butadiene rubber/silicon carbide nanocomposites using response surface methodology

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Filled by Styrene‐butadiene Rubber and Silica Nanoparticles

Analysis on Isotropic and Anisotropic Samples of Polypropylene/Polyethyleneterephthalate Blend/Graphene Nanoplatelets Nanocomposites: Effects of a Rubbery Compatibilizer

Study on the Effect of Halloysite Nanotubes on the Mechanical Properties and Swelling Resistance of Ethylene-Propylene Diene Monomer (EPDM)/Nitrile Butadiene Rubber (NBR) Blend Nanocomposites

Dynamically vulcanized CNC‐reinforced thermoplastic elastomer based on PP/EPDM: Morphology and mechanical properties control via interfacial compatibilization

The Effect of Epoxy Resin Compatibilizer On Polypropylene (PP) / Recycled Acrylonitrile Butadiene Rubber (NBRr) / Banana Skin Powder (BSP) Composites

Adjustable brittle-ductile transition behavior and rheological behavior of polypropylene random copolymer nanocomposites through well interfacial-loaded nanoparticles