Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Abs/蒙脱土纳米复合材料的制备、结构及性能

MONTMORILLONITE REINFORCED SBR AND EFFECT ON THE VULCANIZATION OF RUBBER

Study on thermal stability of PP/MMT nanocomposites

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Polyamide-6/montmorillonite Nanocomposites Toughened with ABS-g-MA Core-Shell Structural Particles

Preparation and thermal properties of ABS/montmorillonite nanocomposite

Synthesis and characterization of polycarbonate/ABS/montmorillonite nanocomposites

Novel Preparation and Properties of EPDM/montmorillonite Nanocomposites

Preparation and Characterization of Flame Retardant Abs/Montmorillonite Nanocomposite

Flammability and thermal stability studies of ABS/Montmorillonite nanocomposite

Preparation and Properties of PA6/Epoxy-resin-modified Montmorillonite Nanocomposites

Improvement in mechanical properties of NBR/AO60/MMT composites by surface hydrogen bond

Thermogravimetric evaluation of PC/ABS/montmorillonite nanocomposite

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Study of Nanocomposites Prepared by Melt Blending Tpu and Montmorillonite

Synthesis and Characterization of Thermoplastic Polyurethane/montmorillonite Nanocomposites Produced by Reactive Extrusion

The Effect of MMT/Modified MMT on the Structure and Performance of the Superabsorbent Composite

Properties of EPDM Nanocomposites Reinforced with Modified Montmorillonite

Preparation and Properties of Pu/Mcmmt Nanocomposites

Study on thermoplastic polyurethane/montmorillonite nanocomposites