Xiang Zhang Haochen Li Rongbo Li Chunyi Kan Xia Dong Qian Xing Zefan Wang a School of Light industry Science and Engineering,Beijing Technology and Business University,Beijing,PR Chinab Petrochina Petrochem Res Inst,Synthet Resin Inst,Beijing,PR Chinac CAS Key Laboratory of Engineering Plastics,Beijing National Laboratory for Molecular Sciences,Institute of Chemistry,Chinese Academy of Sciences,Beijing,PR Chinad University of Chinese Academy of Sciences,Beijing,PR Chinae School of Chemistry and Environmental Engineering,Shenzhen University,Shenzhen,ChinaXiang Zhang is a graduate student in Beijing Technology and Business University. His field of research includes reinforced biodegradable polymers.Haochen Li is a graduate student in Beijing Technology and Business University. His field of research includes structure and property relationship study of biodegradable polymers.Rongbo Li is a senior engineer in Department of Polyolefin Science & Technology,PetroChina Petrochemical Research Institute. He received his Ph.D. degrees from University of Chinese Academy of Sciences in 2010. His research interests include polymers and polymer composites.Chunyi Kan is an undergraduate graduated from Beijing Technology and Business University. Her field of research includes modification of biodegradable polymers.Xia Dong is a professor in Institute of Chemistry,Chinese Academy of Sciences. She received her Ph.D. degrees from Dong Hua University in 2001. His field of research includes microstructure control and performance enhancement of polymeric materials.Qian Xing is an associate professor in Beijing Technology and Business University. She received her Ph.D. degrees from University of Chinese Academy of Sciences in 2013. Her field of research includes performance enhancement of biodegradable polymers and the relationship between polymer structure and properties.Zefan Wang is a professor in Shenzhen University. He received her Ph.D. degrees from University of Chinese Academy of Sciences in 2018. His field of research includes structure and property relationships of polymers.

Abstract:The widespread application of polylactide (PLA) has been limited by its slow crystallization rate and poor toughness. In the present work, a low molecular weight nucleator, TMC 301, and polyamide elastomer (PAE) were incorporated into PLA through melt blending to mediate both the crystallization capability and impact toughness. It was found that the introduction of TMC 301 decreased the crystallization temperature of PLA during the cooling process, while enhancing its cold crystallization capacity of PLA in the heating scan. Accordingly, the presence of TMC 301 shortened the half-crystallization time of PLA at 95°C in the ternary blends with minimal influence on the Avrami index. Moreover, the dispersion size of PAE decreased when the concentration of TMC 301 increased to 0.3 wt%, leading to a substantial increase in the tensile toughness and the impact strength of the PLA/PAE/TMC 301 blend. It is suggested that the size of the elastomer particles is a critical factor influencing the toughening efficiency of TMC301 in PLA/PAE blends. The nucleator TMC 301 and polyamide elastomer (PAE) were incorporated into PLA through melt blending to enhance both crystallization capability and toughness. The phase structure, crystallization behavior and the mechanical performances were studied.

Morphology and mechanical properties of Acrylonitrile-styrene-acrylate toughened plastics with block copolymer chain structure: Acrylonitrile-styrene-acrylate (ASA) toughened plastics with block copolymer chain structure

Nucleating Agent-Containing P(Lla-Mb-Bsa) Multi-Block Copolymers with Balanced Mechanical Properties

Poly(L-Lactic Acid)-Block-Poly(Butylene Succinate-Co-Butylene Adipate) Multiblock Copolymers: from Synthesis to Thermo-Mechanical Properties

Polystyrene-<i>block</i>-poly(<i>n</i>-butyl acrylate)-<i>block</i>-polystyrene Triblock Copolymer Thermoplastic Elastomer Synthesized via RAFT Emulsion Polymerization

Acrylonitrile-Styrene-Acrylate Particles with Different Microstructure for Improving the Toughness of Poly(styrene-co-acrylonitrile) Resin

Synthesis of (Hard-Soft-hard)x Multiblock Copolymers Via RAFT Emulsion Polymerization and Mechanical Enhancement Via Block Architectures

Core-Shell Particles Of Poly(Methyl Methacrylate)-Block-Poly(N-Butyl Acrylate) Synthesized Via Reversible Addition-Fragmentation Chain-Transfer Emulsion Polymerization And The Polymer'S Application In Toughening Polycarbonate

Achieving optimum balance between mechanical properties and gloss of acrylonitrile–styrene–acrylate resin through control of rubber particle size distribution

Study of Poly(vinyl Chloride)/acrylonitrile–styrene–acrylate Blends for Compatibility, Toughness, Thermal Stability and UV Irradiation Resistance

Toughening Of Polyamide-6 With A Maleic Anhydride Functionalized Acrylonitrile-Styrene-Butyl Acrylate Copolymer

Structure and Property of Epoxy-Functionalized Acrylic Rubber Toughened Polylactide

Morphology and Mechanical Behaviors of Rigid Organic Particles Reinforced Polycarbonate

The Effect of Core–Shell Ratio of Acrylic Impact Modifier on Toughening PLA

Assessment of mechanical properties and morphology of polylactic acid/acrylonitrile butadiene styrene blends and their carbon fabric-reinforced composites

Syntheses and properties of tri- and multi-block copolymers consisting of polybutadiene and polylactide segments

Preparation and Mechanical Properties of Toughened ABS Resin via Bulk Polymerization

Toughening of polylactide with epoxy-functionalized methyl methacrylate–butyl acrylate copolymer

Morphology, viscoelastic properties and the mechanical performance of highly toughened polyamide 6/acrylonitrile–butadiene–styrene/polylactic acid ternary blends

Tracking the evolution of the morphology and stress distribution of SIS thermoplastic elastomers under tension using atomic force microscopy

Mechanical and Morphological Properties and Deformation Mechanisms of Acrylonitrile-Butadiene-Styrene/Poly(ϵ-Caprolactone) Blends with Varied Matrix Composition

Effect of nucleating agent incorporation on the crystallization and mechanical properties of polylactide/polyamide elastomer blends