Abstract:Poly(ethene-co-1-butene)-graft-methyl methacrylate-acrylonitrile (PEB-g-MAN) was prepared by suspension grafting copolymerization of methyl methacrylate (MMA) and acrylonitrile(AN) onto PEB. PEB-g-MAN/SAN resin blends (ABMS) were prepared by blending PEB-g-MAN with styrene-acrylonitrile copolymer (SAN resin). The effects of AN/(MMA+AN) feed ratio (f(AN)), PEB/(PEB+MMA+AN) feed ratio (f(PEB)) and benzoyl peroxide (BPO) dosage on the monomer conversion ratio (CR), rubber's grafting ratio (GR), grafting efficiency (GE) of the copolymerization and the toughening effect of PEB-g-MAN on the SAN resin were investigated. FTIR quantitative analysis showed that when the weight percent of AN unit in the unextracted product was 21.5 wt% with f(AN) of 25 wt%, the toughening effect of unextracted PEB-g-MAN on SAN resin was the highest. Gel permeation chromatography (GPC) analysis showed that when f(AN) was 25 wt%, the grafted copolymer had the lowest molecular weight and ABMS had highest toughness. Transmission electron microscopy (TEM) analysis showed that the highest toughness occurred when the phase structure of ABMS was cocontinuous with f(AN) of 25 wt%. When f(AN) was 25 wt% PEB-g-MAN domains have numerous small SAN domains in them, which was occlusion structure. Scanning electron microscopy (SEM) analysis indicated that the ABMS fracture surfaces had plastic flow visible, which looked like a craze fibers morphology, for the sample with highest impact strength (f(AN) = 25 wt%). Dynamic mechanical thermal analysis (DMA) showed that the miscibility of the PEB phase and SAN phase improved after graft copolymerization of MMA and AN onto PEB.

Toughening Of Polyamide-6 With A Maleic Anhydride Functionalized Acrylonitrile-Styrene-Butyl Acrylate Copolymer

Toughening of PA6 with MAH Functionalized Acrylate-styrene-acrylonitrile Copolymer

Toughening of Polyamide‐6 with Little Loss in Modulus by Block Copolymer Containing Poly(styrene‐alt‐maleic Acid) Segment

Morphology and mechanical properties of Acrylonitrile-styrene-acrylate toughened plastics with block copolymer chain structure: Acrylonitrile-styrene-acrylate (ASA) toughened plastics with block copolymer chain structure

Reactive Compatibilization and Elastomer Toughening of Poly(2,6-dimethyl-1,4-phenylene Oxide)/polyamide 6 Blends

Effect of Maleic Anhydride Copolymerization Mode on the Properties of PA6/ABS Blends

Preparation of a Structured Acrylic Impact Modifier and Its Application in Toughening Polyamide 6

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Blends of Poly(2,6-Dimethyl-1,4-Phenylene Oxide)/Polyamide 6 Toughened by Maleated Polystyrene-Based Copolymers: Mechanical Properties, Morphology, and Rheology

Acrylonitrile-Styrene-Acrylate Particles with Different Microstructure for Improving the Toughness of Poly(styrene-co-acrylonitrile) Resin

Effect of Reactive Group Types on the Properties of Core-Shell Modifiers Toughened PA6

Toughening of PA6 Nanocomposites by Reactive Acrylonitrile–butadiene–styrene Core–shell Rubber Particles

Modification of the Grafting Character to Prepare PA6/ABS-g-MA Blends with Higher Toughness and Stiffness

Enhanced Compatibility, Morphology, and Low-Temperature Toughness of Polyamide 6/poly(dimethylsiloxane)/epoxidized Silicone Rubber Composites

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Preparation of Super Toughened PA 6/ABS Blend

Polyamide-6/montmorillonite Nanocomposites Toughened with ABS-g-MA Core-Shell Structural Particles

Toughening Effect of Poly(Ethene-Co-1-Butene)-Graft-Methyl Methacrylate and Acrylonitrile on Styrene-Acrylonitrile Copolymer (San)

Toughening Mechanism of Long Chain Branched Polyamide 6

Construction of Core‐Shell Structure in PA6/ABS/SEBS Blends for Achieving Stiffness‐Toughness Balance

Toughness enhancement of polyamide 6,12 with intermolecular hydrogen bonding with 3‐pentadecylphenol