Structure and Property of Epoxy-Functionalized Acrylic Rubber Toughened Polylactide

Liang He,Shulin Sun,Mingyao Zhang,Huixuan Zhang

DOI: https://doi.org/10.16865/j.cnki.1000-7555.2013.12.019

2013-01-01

Abstract:The copolymer of glycidyl methacrylate and acrylate monomer(ACM)was used to toughen polylactide(PLA).The impact test result indicates that the impact strength of the blends increases first and then decreases with the ACM content increasing.When the mass faction of ACM is 25%,the impact strength reaches the maximum value of 670J/m.The tensile test shows that the Young's modulus and yielding stress of the blends decrease with the ACM content increasing.The glass transition temperature(Tg)of ACM increases with the ACM content andTgof PLA changes little.DSC test indicates the cold crystallization temperature of PLA decreases with the addition of ACM.SEM shows that ACM disperses in the PLA matrix uniformly when the mass fraction of ACM is 10%,and the phase domain size increases with the ACM content increasing.Deformation zone observed by SEM shows that the cavitation takes place for ACM and the shear yielding occurs for the PLA matrix.