Abstract:Rubber-toughened glassy polymers, researched as a prominent toolkit to fabricate high-performance plastics, are usually confronted with a great loss of tensile strength at the point of apparent yielding. Exploiting advanced plastic nanoalloys with high toughness and small stress difference (Delta sigma) between yielding and tensile platforms at high-strain levels is extremely being pursued yet challenging. Taking glassy poly(l-lactide) (PLLA) as an example, here, a viable and universal approach is discovered to elaborate supertoughened nanoalloys with significantly depressed yielding behaviors by virtue of elastomeric nanobelts to replace conventional rubber droplets in a glassy matrix by a simple reactive processing strategy. Stereocomplex crystal (SC)-immobilized EGMA, prepared by cocrystallization of enantiopure PDLA-/PLLA pairs respectively pregrafted onto EGMA chains, is used to toughen PLLA. Therefore, the structure of the elastomer, from droplets and shells to nanobelts in the PLLA matrix, can be achieved. Such controllable morphology allows for the corresponding nanoalloys with significantly enhanced notched impact strength (from 5.7 to 60.2 to 91.3 kJ/m(2)) and shortened Delta sigma (from 17.5 to 15.8 to 6.8 MPa). Furthermore, tricontinuous morphology integrates penetrative elastomeric nanobelts (EGMA), glassy polymers (PLLA), and SC phases, which are achieved by adjusting SC moieties. The authors demonstrate that the resulting nanoalloy integrates superior performance (toughness, heat resistance, and crystallization rate) and stress leveling-off without fully undergoing real yielding (Delta sigma = 1.4 MPa), surpassing most elastomer-toughened PLA alloys. The morphology development and underlying origin of the impact/deformation mechanism are elucidated. To our knowledge, this is the first time that the validity of such supertoughened glassy polymer alloys with significantly necking-suppressed deformation has been demonstrated. The versatile strategy can be further extended to arbitrary engineering plastics, including PET, PBT, and nylon, providing a paradigm in the development of advanced nanoalloys, which is quite challenging via existing industrial technologies.

Reactive Micro-Crosslinked Elastomer for Supertoughened Polylactide

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Bio-based Polyamide-Assisted Supertoughening of Polylactide Through Hardening of the EGMA Elastomeric Domains of Much Low Amount

Rigid molecular chains trapped reactive elastomers for high performance PLLA composites with excellent tough-strength balance

Ultrahigh Strength and Toughness of Polylactide Added with EGMA Elastomer of a Small Amount Processed Via Pressure-Induced Flow above the Glass Transition Temperature

Supertough polylactide materials prepared through in situ reactive blending with PEG-based diacrylate monomer.

Construction of Elastomeric Nanobelts in a Glassy Polymer Matrix: Toward Supertoughened Nanoalloys with Significantly Depressed Yielding Behaviors

Designing of reactive micro-crosslinked PBAT as the efficient biodegradable toughener for PLLA

Effect of Ethylene/butyl methacrylate/Glycidyl Methacrylate Terpolymer on toughness and biodegradation of poly (l-lactic acid)

Toughening of Polylactide with High Tensile Strength via Constructing an Integrative Physical Crosslinking Network Based on Ionic Interactions

High Performance Polylactide Toughened by Supertough Polyester Thermoplastic Elastomers: Properties and Mechanism

Role of Interfacial Postreaction during Thermal Treatment: Toward a Better Understanding of the Toughness of PLLA/Reactive Elastomer Blends

Toughening of polylactide with epoxy-functionalized methyl methacrylate–butyl acrylate copolymer

Development of Tough Thermoplastic Elastomers by Leveraging Rigid-Flexible Supramolecular Segment Interplays

Rigid epoxy microspheres reinforced and toughened polylactic acid through enhancement of interfacial reactivity

Supertoughened Polylactide Via the Addition of Low Content Poly(ε-caprolactone) and Tensile Deformation above the Glass Transition Temperature

Super toughed poly (lactic acid)/poly (ethylene vinyl acetate) blends compatibilized by ethylene-methyl acrylate-glycidyl methacrylate copolymer

Phase Morphology and Mechanical Properties of Super-Tough PLLA/TPE/EMA-GMA Ternary Blends

Supertoughened poly(lactic acid) containing low content of poly(ethylene oxide) with balanced mechanical property: The role of mesophase and phase morphology

Supertoughened Polylactic Acid/Polybutylene Adipate Terephthalate Blends Compatibilized with Ethylene-Methyl Acrylate-Glycidyl Methacrylate: Morphology and Mechanical Properties by the Response Surface Methodology

Highly toughened poly(lactic acid) blends prepared by reactive blending with a renewable poly(ether‐block‐amide) elastomer