Abstract:Poly(lactic acid) (PLA) was an eco‐friendly and biodegradable material. However, its molecular chain was inflexible and showed limited toughness. In this work, PLA was modified with epoxy‐terminated hyperbranched polymer (EHBP) by melt blending to improve the toughness of PLA. The results showed that epoxy groups within EHBP reacted with carboxyl and hydroxyl groups of PLA, forming chemical micro‐crosslinking. In addition, intermolecular hydrogen bonds were formed between hydroxyl groups on EHBP and PLA, and the combined action of the two ultimately improved the toughness and strength of PLA. Chemical micro‐crosslinking was validated via Fourier transform infrared spectroscopy (FTIR) and gel content analysis. By observing the microscopic morphology of the impact fracture of the blends, it was found that the interface adhesion of the blends increased with the addition of EHBP, enhancing the corresponding mechanical properties. The best interface adhesion was achieved when 2.5 phr EHBP was added to PLA. At this point, compared with neat PLA, the maximum tensile strength, impact strength, elongation at break, and flexural modulus of PLA/EHBP increased by 17.4%, 54.5%, 107.1%, and 25.8% respectively, achieving the goal of simultaneously enhancing the toughness and strength of PLA. The simultaneous improvement in the strength and toughness of PLA expands its potential application value. Poly(lactic acid) (PLA) is an eco‐friendly and biodegradable material. However, its molecular chain was rigid and showed limited toughness. In this work, PLA was modified with epoxy‐terminated hyperbranched polymer (EHBP) by melt blending to improve the toughness. The results showed that epoxy groups within EHBP reacted with carboxyl and hydroxyl groups of PLA, forming chemical micro‐crosslinking. In addition, intermolecular hydrogen bonds were also formed between EHBP and PLA. The combined action of the above two aspects ultimately improved the toughness and strength of PLA. The mechanical property tests results showed that the mechanical properties of PLA improved best when 2.5 phr of EHBP was added. At this point, compared with neat PLA, the maximum tensile strength, impact strength, elongation at break, and flexural modulus of PLA/EHBP increased by 17.4%, 54.5%, 107.1%, and 25.8%, respectively, compared to those of neat PLA. It achieves the goal of simultaneously enhancing the toughness and strength of PLA and subsequently expands its potential application applications.

Synergistic toughening and reinforcement of poly(lactic acid) with epoxy‐terminated hyperbranched polymers

Improvement in Toughness and Crystallization of Poly(l‐lactic Acid) by Melt Blending with Poly(epichlorohydrin‐co‐ethylene Oxide)

A Facile Fabrication Of High Toughness Poly(Lactic Acid) Via Reactive Extrusion With Poly(Butylene Succinate) And Ethylene-Methyl Acrylate-Glycidyl Methacrylate

Toughening Poly(Lactic Acid) by Melt Blending with Poly(Ether-Block-Amide) Copolymer

Rigid epoxy microspheres reinforced and toughened polylactic acid through enhancement of interfacial reactivity

Improvement in Toughness and Crystallization of Poly(L-Lactic Acid) by Melt Blending with Ethylene/Methyl Acrylate/Glycidyl Methacrylate Terpolymer

Super-Toughened Poly(lactic Acid) with Poly(ε-caprolactone) and Ethylene-Methyl Acrylate-Glycidyl Methacrylate by Reactive Melt Blending

Design of biodegradable PLA/PBAT blends with balanced toughness and strength via interfacial compatibilization and dynamic vulcanization

Highly Toughened Polylactide/epoxidized Poly(styrene-B-butadiene-b-styrene) Blends with Excellent Tensile Performance

In Situ Anionic Polymerization and Mechanical, Thermal and Morphological Properties of Toughened and Volume-Enhanced Blends of Poly(lactic Acid)

Super toughed poly (lactic acid)/poly (ethylene vinyl acetate) blends compatibilized by ethylene-methyl acrylate-glycidyl methacrylate copolymer

Highly toughened poly(lactic acid) blends prepared by reactive blending with a renewable poly(ether‐block‐amide) elastomer

Toughening Modification of Polylactic Acid by Long-Chain Hyperbranched Polymers Containing Polycaprolactone end Groups

Toughening Modification of Poly(lactic acid) via Melt Blending

Polylactic Acid Based Blends and Biocomposites with Improved Performance

Supertoughened Biodegradable Poly(l-Lactic Acid) by Multiphase Blends System: Crystallization, Rheological and Mechanical Properties

Phase morphology, rheological behavior and mechanical properties of supertough biobased poly(lactic acid) reactive ternary blends

Toughening Polylactide with Epoxidized Styrene–butadiene Impact Resin: Mechanical, Morphological, and Rheological Characterization

Study of Hydrogen-Bonded Blend of Polylactide with Biodegradable Hyperbranched Poly(ester Amide)

Toughening Biosourced Poly(lactic Acid) and Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) Blends by a Renewable Poly(epichlorohydrin-co-ethylene Oxide) Elastomer

Study on Miscibility, Thermal Properties, Degradation Behaviors, and Toughening Mechanism of Poly(lactic Acid)/poly (Ethylene-Butylacrylate-glycidyl Methacrylate) Blends.