Abstract:Zirconia powder with good dispersion, fine particle size, and stability is used as high-quality raw material in many fields, such as ceramic materials and refractories. In this paper, the influence of lanthanum oxide (La2O3) and yttrium oxide (Y2O3) co-doped zirconia (ZrO2) on its phase transformation behavior, phase stability, and microstructure were investigated. The ball milling method is applied to fabricate different amounts of La2O3-doped yttrium oxide stabilized zirconia oxide. Then, the powder obtained from ball milling was roasted using the microwave sintering method. The samples were characterized using XRD, FT-IR, Raman, SEM and BET to determine the optimal conditions for La2O3–Y2O3 co-doped ZrO2 powder. The results showed that replacing part of Y2O3 with La2O3 increases zirconia powder's tetragonal and cubic phase, enhancing the fracture strength of the subsequent synthesized materials. At the same time, the stability of zirconia stabilized with La2O3 doping is significantly improved compared to that of Y2O3 alone. According to all analysis methods, when the doping amount is 2.8Y0.2La, the powder's phase composition, stability, particle size distribution, and dispersion degree are the best compared with other doping amounts in our study. The obtained powder has a smaller specific surface area, a lower surface energy, a smaller porosity, and a higher density. The samples under this condition can be better used in subsequent materials. The enhancement of various properties of zirconia can significantly prolong the service life of materials in practical applications.

Preparation method of scandium oxide-stabilized zirconium oxide nano-powder

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Study on a new, environmentally benign method and its feasibility of preparing nanometer zirconia powder

Preparation of Zirconia Base Solid Solution Nanopowder by Exothermal Solid-State Synthesis

Preparation of Zirconia Powders by Sol-gel Process

Preparation of Nano-ZrO2 powder via a microwave-assisted hydrothermal method

Nanocrystalline Cubic Phase Scandium-Stabilized Zirconia Thin Films

Preparation of nano-sized 6MgO–2Y2O3–ZrO2 powders by a combined co-precipitation and high energy ball milling process

Ball milling assisted preparation of nano La–Y/ZrO2 powder ternary oxide system: Influence of doping amounts

Preparation and Characterization of Nanocrystalline Thin Films of Al2O3 or TiO2 Doped Scandia Stabilized Zirconia Solid Electrolytes

Ethanol-induced formation of precursor for 8mol% Yttria-stabilized zirconia: Towards the production of well-dispersed, easily sintering, and high-conductivity nano-powders

Preparation of spherical zirconia powder by nano-reactor of microemulsion and its densification behavior

Preparation of Magnesium Stabilized Zirconia Nanoparticles by Buffer Solution Precipitation

Simple Preparation of Yttria‐Stabilized Zirconia Powders by Plasma Discharge Electrolysis in Nitrate Solution

Preparation of zirconium metal through electrolysis of zirconium oxycarbonitride anode

The research of crystal structure and electrical properties of a new electrolyte material: Scandia and holmia stabilized zirconia

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

A Novel Preparation Process for Thermally Stable Ultrafine Tetragonal Zirconia Aerogel

Preparation of nano-sized strontium titanate powder and research on its surface modification process

Controllable synthesis of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 submicron sphere by hydroxide co-precipitation method

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium