Abstract:High-temperature superconductor (Re)Ba2Cu3Ox (ReBCO) conductor on round core cable (CORC®) has a large current carrying capacity for high field magnets. Lorentz forces acting on CORC conductors, cause a reduction of the critical current, or even permanent degradation of their performance when exceeding critical values. Transverse compressive stress is one of the principal mechanical stresses when CORC cables are bundled to CICC conductors capable of operating at currents up to 100 kA in magnetic fields of up to 20 T. In this research, a mechanical-electromagnetic model is developed to study the effect of transverse compressive loads on the electromagnetic performance of CORC cables. A mechanical transverse load on the cable is implemented to simulate the electromagnetic force. A comparison of numerical simulations with experiments for a three-layer CORC cable is first performed to validate the model's reliability, with particular attention to critical current reduction during the transverse compression process. A novel feature of this paper is that the model developed can analyze both mechanical response under transverse compressive loads and electromagnetic performance under applied AC magnetic fields with low amplitudes. On this basis, the model investigates the effects of winding parameters on the axial strain and critical current reduction of the ReBCO layer in a single-layer CORC cable. The numerical analysis shows that increasing the winding angle can reduce the axial strain and critical current reduction of the ReBCO layer in the contact area. Subsequently, a detailed comparative study is carried out studying the axial strain of the ReBCO layer in the non-contact area with and without taking the winding core into account. In addition, a sudden increase of the magnetization loss is explained when the transverse compressive load reaches a certain level. Finally, a six-layer CORC cable's electromagnetic analysis is performed, and each tape layer's critical current reduction is investigated and discussed. The comparison of magnetization loss and current density between six- and single-layer CORC cables in the no-strain case is also given. This FE model can guide optimizing a cable design for specific application conditions.

Experimental Study on Cabling Properties of Different REBCO Coated Tapes

Performance study of REBCO multi-filament tapes/ CORC cables prepared by reel-to-reel mechanical incision

Effect of different core diameters on the current-carrying performance of CORC cables with REBCO multi-filamentary tapes

Electromechanical behaviour of REBCO coated conductor toroidal field coils for ultra-high-field magnetic-confinement plasma devices

Current-carrying properties of REBCO multi-filamentary tapes prepared by reel-to-reel ultraviolet picosecond laser cutting

Strain Distribution and Critical Current Characteristics of an Individual REBCO Tape and Quasi-Isotropic Superconducting Strand Under Bending Loads by the Layerwise Theory

Critical Current Measurement of REBCO Cables by Using a Superconducting Transformer

Experimental study on screening-current induced strain in REBCO insert coils: under critical current control and operation current cycles

Electromechanical degradation of REBCO coated conductor tapes under combined tension and torsion loading

The current unbalance in stacked REBCO tapes -- simulations based on a circuit grid model

High-field thermal transport properties of REBCO coated conductors

Bending Characteristics of a Transposed Cable (xcable) with In-Plane Bending of REBCO Tapes

Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables

Dynamic resistance of a REBCO tape carrying direct current under a mixture magnetic field of ac field with dc-biased field

Analyses of the plastic deformation of coated conductors deconstructed from ultra-high field test coils

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Temperature- and field-dependent characterization of a conductor on round core cable

REBCO tapes for applications in ultra-high fields: critical current surface and scaling relations

Bending-Peeling Method to Research the Effect of Lateral Stress on Superconductivity of REBCO Tape at Liquid-Nitrogen Temperature

Study on the Arrangement of REBCO Double-Pancake Coils with Different Critical Currents in 30-T Superconducting Magnets

Experimental and Numerical Study on the Magnetization Process of Roebel Cable Segments