Abstract:In this paper, we employ the anisotropic bulk approximation to successfully implement the electromagnetic modeling of superconducting coils wound with rare-earth-barium-copper-oxide (REBCO) tapes based on the H-formulation, in which the field-dependent critical current density and highly nonlinear E-J characteristic are considered. The total number of turns in the stacks of REBCO pancake coils is up to several thousand. We validate the anisotropic bulk model by comparing the ac loss of a small four-pancake coil between the bulk model and the original model which takes the actual thickness of the superconducting layer into account. Then, the anisotropic bulk model is used to investigate the self-field problem of the REBCO prototype coils of the National High Magnetic Field Laboratory 32 T all-superconducting magnet. The field and current density distributions are obtained, and an obvious shielding effect is observed at the top and bottom of the coils. The ac losses in the first and second cycles are calculated. The former is crucial to the design of the cooling system and the latter relates to the routine consumption of the liquid helium. It is found that the ac loss in the first cycle is 2.6 times as large as that in the second cycle. We also study the ac loss dependences on some key parameters (the critical current, n-value and ramp rate of the applied current). It is found that both in the first and second cycles, the ac loss increases with decreasing critical current. Moreover, the influence of the n-value on the ac loss is negligible. In addition, the ac loss decreases logarithmically with increasing ramp rate. However, the average power loss increases linearly with increasing ramp rate. We also compare some analytical estimates with the simulation result for the ac loss of the dual prototype coils. It is found that the results of Bean's slab model are closer to the simulation result. The presented model is a useful tool to help us understand electromagnetic behavior and ac losses in REBCO high field coils. It also provides a basis to analyze the mechanical characteristics in the coils in the future.

Study on the Arrangement of REBCO Double-Pancake Coils with Different Critical Currents in 30-T Superconducting Magnets

Experimental and Simulation Studies of SCIF Considering Non-Uniform Critical Current

Experimental study on the an-isotropic critical current of REBCO tape

Electromagnetic Design and Mechanical Behavior Analysis of an 850 MHz All REBCO Nuclear Magnetic Resonance Magnet

Numerical Analysis of the Electromechanical Behavior of High-Field REBCO Coils in All-Superconducting Magnets

Design, Fabrication, and Test of a 12 T REBCO Insert for a 27 T All-Superconducting Magnet

Research on the Evolution Characteristics of REBCO Inductance for 19 T All-Superconducting Magnet

Design and Preliminary Tests of a 20-T REBCO Insert Coil for a 35-T All Superconducting Magnet

A Novel REBCO Conductor Design to Reduce Screening-Current Field in REBCO Magnets

Experiment and Numerical Modeling of Current Distributions Inside REBCO Tapes of No-Insulation Superconducting Magnet Coils Under Time-Varying Fields

Numerical Analysis of Screening-Current Induced Strain in a 16 T REBCO Insert Within a 20 T Background Field

REBCO tapes for applications in ultra-high fields: critical current surface and scaling relations

Design of a 3 T REBCO Dipole Magnet Considering Screening Current Induced Magnetic Field and Its First Test Result at 77 K

Vortex Shaking Study of REBCO Tape with Consideration of Anisotropic Characteristics.

Conceptual Design of Hybrid IBS-REBCO Magnet and a Study on Joint Technology for High-Field Application

3D Modelling of Coupled Electromagnetic-Mechanical Responses in REBCO Coils Involving Tape Inhomogeneity

Anisotropic in-plane field angle dependence of critical current in commercial REBCO tapes and its impact on toroidal field magnet for compact tokamak fusion device

Progress in the Construction of a 20 T REBCO Insert Coil for High-Field All-Superconducting Magnets

Experimental Study on Cabling Properties of Different REBCO Coated Tapes

Modelling the mechanics of 32 T REBCO superconductor magnet using numerical simulation

Electromagnetic Modeling of REBCO High Field Coils by Theh-Formulation