Abstract:High temperature REBCO superconducting tapes are very promising for high-field magnets. Under high magnetic fields there are high electro-mechanical forces, and thus concern for mechanical damage. Due to large screening currents and composite structure of the tape, the mechanical design of these magnets is not straightforward. In addition, many contemporary designs use insulated winding. In this work we develop a novel two-dimensional axisymmetric finite element tool programmed in MATLAB that assumes the displacement field within linear elastic range. The stack of pancakes and a large number of REBCO tape turns are approximated as an an-isotropic bulk hollow cylinder. Our results agree with uni-axial stress experiments in literature, validating the bulk approximation. Here, we study the following configuration. The current is first ramp up to below the critical current and we calculate the screening currents and the forces that they cause using the MEMEP model. As a case study, 32 T REBCO superconductor magnet, is taken and simulated numerically. We have done complete mechanical analysis of the magnet by including the axial and shear mechanical quantities for each pancake unlike previous work where only radial and circumferential quantities are focused. Effect on mechanical quantities without screening current is also calculated and compared. It is shown that including screening current induced field strongly affect the mechanical quantities, specially the shear stress. The latter might be the critical quantity for certain magnet configurations. Additionally, in order to overcome high stresses, a stiff over banding of different material is considered and numerically modelled which significantly reduces the mechanical stresses. The FE based model developed is efficient to calculate the mechanical behaviour of any general superconductor magnet and its devices.

Design of a 3 T REBCO Dipole Magnet Considering Screening Current Induced Magnetic Field and Its First Test Result at 77 K

Design and Preliminary Tests of a 20-T REBCO Insert Coil for a 35-T All Superconducting Magnet

Numerical Analysis of Screening-Current Induced Strain in a 16 T REBCO Insert Within a 20 T Background Field

Test of an 8.66-T REBCO Insert Coil with Overbanding Radial Build for a 1.3-Ghz LTS/HTS NMR Magnet

Generation of 25 T with an all-superconducting magnet system: field profile and field quality measurements of a layer-wound 4 T REBCO insert coil for a 21 T LTS magnet

Study on the Arrangement of REBCO Double-Pancake Coils with Different Critical Currents in 30-T Superconducting Magnets

Re-assembly and test of a COMB dipole magnet with STAR wires

Numerical Simulation of Magnetic Field for Compact Electromagnet Consisting of REBCO Coils and Iron Yoke

Vortex Shaking Study of REBCO Tape with Consideration of Anisotropic Characteristics.

Experimental and Simulation Studies of SCIF Considering Non-Uniform Critical Current

26.86-tesla direct-current magnetic field generated with an all-REBCO superconducting magnet

Design of a 20 T Class REBCO Insert in a 15 T Low Temperature Superconducting Magnet

Magnetization and screening current in an 800-MHz (18.8-T) REBCO NMR insert magnet: experimental results and numerical analysis

A Novel REBCO Conductor Design to Reduce Screening-Current Field in REBCO Magnets

Fast and accurate electromagnetic modeling of non-insulated and metal-insulated REBCO magnets

Design and Testing of a Gas-Helium Conduction Cooled REBCO Magnet for a 300 kvar HTS Synchronous Condenser Prototype

Modelling the mechanics of 32 T REBCO superconductor magnet using numerical simulation

Conceptual design of a 33 T cryogen-free magnet REBCO insert: Mechanical aspects and Protection against Thermal Runaway

Progress in the Construction of a 20 T REBCO Insert Coil for High-Field All-Superconducting Magnets

First-Cut Design of a Benchtop Cryogen-Free 23.5-T/25-mm Magnet for 1-GHz Microcoil NMR