Abstract:We have designed a 30-T superconducting magnet for important experimental facilities in condensed matter physics research. The critical current of rare-earth barium copper oxide (REBCO) tapes directly or indirectly affects the electromagnetic margin, central magnetic field, hysteresis losses, field homogeneity, and screening current–induced stresses (SCIS) of the magnet. Given the poor critical current consistency of REBCO tapes at 4.2 K and their complex field-dependence, the arrangement of double-pancake (DP) coils is crucial in superconducting magnets. Based on measurements of over 100 REBCO tapes at 4.2 K and under an 8-T perpendicular field, we studied the arrangement of DP coils with different critical currents to assess their impact on the electromagnetic margin, central magnetic field, hysteresis losses, field homogeneity, and SCIS of the 30-T superconducting magnet. The results indicate that, depending on the magnet's requirements for different performance aspects, DP coils wound with higher critical currents should be positioned in locations with lower sensitivity to critical current. This approach serves to reduce the operating factor, screening current–induced field (SCIF), peak hoop SCIS, and losses, respectively. These findings provide valuable insights into the design of ultra-high-field REBCO superconducting magnets and arrangement of DP coils.

Design and Testing of a Gas-Helium Conduction Cooled REBCO Magnet for a 300 kvar HTS Synchronous Condenser Prototype

Development of a Conduction-Cooled HTS SMES

Development and Testing of a 300-Kvar HTS Synchronous Condenser Prototype

General Design of a 300-Kvar HTS Synchronous Condenser Prototype

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Design and Experimental Investigations on the Helium Circulating Cooling System Operating at Around 20 K for a 300-kvar Class HTS Dynamic Synchronous Condenser

The Design and Winding Method of A Conduction-Cooled 1.5 T Bi-2223 High Temperature Superconducting Magnet

Design and Preliminary Tests of a 20-T REBCO Insert Coil for a 35-T All Superconducting Magnet

Design of a 20 T Class REBCO Insert in a 15 T Low Temperature Superconducting Magnet

Development of YBCO Insert for a 25 T All Superconducting Magnet

Design and Analysis of a Cooling System for the REBCO Coil Based on GM/JT Cycle

High Temperature Superconducting Magnet for Fast Discharging Experiments

Design of a 30-K/4-kj HTS Magnet Cryocooled with Solid Nitrogen

Test of an 8.66-T REBCO Insert Coil with Overbanding Radial Build for a 1.3-Ghz LTS/HTS NMR Magnet

Design of a 3 T REBCO Dipole Magnet Considering Screening Current Induced Magnetic Field and Its First Test Result at 77 K

First-Cut Design of a Benchtop Cryogen-Free 23.5-T/25-mm Magnet for 1-GHz Microcoil NMR

Development of Testing Device for Critical Current Measurements for HTS/LTS

Study on the Arrangement of REBCO Double-Pancake Coils with Different Critical Currents in 30-T Superconducting Magnets

Experimental study on the an-isotropic critical current of REBCO tape

Numerical Simulation of Magnetic Field for Compact Electromagnet Consisting of REBCO Coils and Iron Yoke

Conceptual design of a 33 T cryogen-free magnet REBCO insert: Mechanical aspects and Protection against Thermal Runaway