Abstract:Heat treatments are inevitable not only in the production of rare earth barium copper oxide (REBCO) tapes, but also in their post-processing for applications, typically, in soldering and epoxy/wax impregnation during the fabrication of REBCO coils. In general, the heat treatment of REBCO tapes should be carried out at lower temperature for a shorter time, but the specific safe boundary of heat-treatment temperature and time for REBCO tapes is still unknown. Therefore, a comprehensive study on the typical electrical, mechanical, and electromechanical characteristics of REBCO tapes after heat treatments under temperature of 250 °C is necessary. This work focus on the copper-encapsulated REBCO tapes, which are more robust (while with much lower engineering current density) to be processed in application systems than the tapes without encapsulation. The critical current degradation, stress-strain characteristic, and electromechanical properties of REBCO tapes were measured after heat treatments at different temperatures in argon and oxygen atmosphere. A 2D finite element analysis model was established for detailed stress/train analyzes under tension and bending based on the analysis of residual stress/strain. The results indicate that the critical current of the copper-encapsulated REBCO tapes decreases with increasing heat-treatment temperature and dwell time, and is of no evident relation to atmosphere. In addition, increased temperature of heat treatment leads to an obvious decrease in the yield strength and critical tensile stress. This effect is mainly attributed to the degradation of mechanical properties of the encapsulated copper layer, which is demonstrated by the combination of our finite element simulation and the experiments results. Interestingly, the change in the critical bending radius due to heat treatments was slight, because the bending axial strain of the REBCO layer remained almost unchanged after heating. It is also worthy to note that all the properties tested in this study were irrelevant to the external oxygen partial pressure during the heating process. As a practical conclusion for the application systems, an upper and atmosphere-irrelevant limit of processing temperature of 130 or 150 °C (2 h dwell time) was proposed for copper-encapsulated REBCO tapes, under which the critical current, yield strength, critical tensile stress/strain and critical bending radius of the copper-encapsulated REBCO tapes decay by < 1% or 3%, respectively.

Electromechanical degradation of REBCO coated conductor tapes under combined tension and torsion loading

Critical current degradation of commercial REBCO coated conductors under thermomechanical loads

Critical current degradation and delamination crack observation of epoxy-coated REBCO superconducting tapes after thermal cycles in liquid nitrogen

Plastic Deformation Simulation of REBCO Tapes Using Particle Methods

Numerical Study on Mechanical Behavior and Electromechanical Properties of Solder-Jointed REBCO-Coated Conductors

Performance study of REBCO multi-filament tapes/ CORC cables prepared by reel-to-reel mechanical incision

Current-carrying properties of REBCO multi-filamentary tapes prepared by reel-to-reel ultraviolet picosecond laser cutting

Analyses of the plastic deformation of coated conductors deconstructed from ultra-high field test coils

Evaluation of the effect of edge cracks on critical current degradation in REBCO tapes under tensile stress

Oxygen out-diffusion in REBCO coated conductor due to heating

Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables

Bending-Peeling Method to Research the Effect of Lateral Stress on Superconductivity of REBCO Tape at Liquid-Nitrogen Temperature

Experimental study on screening-current induced strain in REBCO insert coils: under critical current control and operation current cycles

Electromechanical behaviour of REBCO coated conductor toroidal field coils for ultra-high-field magnetic-confinement plasma devices

Electromagnetic-thermal-structure multi-layer nonlinear elastoplastic modelling study on epoxy-impregnated REBCO pancake coils in high-field magnets

An Advanced Computational Approach for Evaluating Screening-Current-Induced Strain in REBCO HTS Coils Considering Electromagnetic-Mechanical Coupling

Typical electrical, mechanical, electromechanical characteristics of copper-encapsulated REBCO tapes after processing in temperature under 250 °C

In Situ Detection of Delamination and Critical Current Degradation Caused by the Thermal Stress in Epoxy Impregnated REBa2Cu3O7−δ Coils

Screening-current-induced mechanical strains in REBCO insert coils

Mechanical behavior of HTS tape in highly flexible REBCO cable under tensile and torsional loads

Impact of Anticlastic Deformation on REBCO Tapes Wound in Multilayer Round Cable