Abstract:This paper focuses on the fabrication of a series of TiBN-Cu films with varying B content using a non-equilibrium magnetron sputtering process. The microstructure, mechanical properties, and tribological performance under polyalphaolefin(PAO) lubrication of these films were fully investigated. The results indicate that the TiBN-Cu films are composed of fcc-TiN, fcc-Cu, hcp-TiB2, and alpha-BN. Under PAO6 lubrication, the friction coefficient and wear rate of the TiBN-Cu/PAO composite system first decrease and then slightly increase. The mechanisms behind the enhanced lubrication behavior in terms of wear and friction of the composite system were thoroughly investigated, focusing on the lubrication state, PAO molecular adsorption behavior, and tribochemical products. The lubrication state revealed that the surface roughness of the films directly affects the continuity of the oil film. Calculations of the surface energy revealed that the surface energy of the films decreases gradually with increasing B content, exhibiting oleophilic characteristics that are conducive to the spread of PAO6 on the film's surface. Based on Density functional theory(DFT), calculations of the adsorption energy in the composite system indicated the formation of a robust physicochemical adsorption layer on the surface of the TiBN-Cu/PAO composite. Raman spectroscopy and transmission electron microscope(TEM) analyses of the tribochemical products revealed the in-situ generation of an amorphous carbon-hydrogen lubricating film with good lubricating performance on the TiBN-Cu composite film under PAO6 lubrication, due to a friction-induced catalytic effect. Additionally, molecular dynamics(MD) simulations based on the theory of molecular dynamics were conducted to explore the degradation process of PAO6 molecules in the solid-liquid composite system under friction, clarifying the "adsorption, dehydrogenation, carbon chain breaking, and carbon chain reconstruction" process in the TiBN-Cu/PAO system. These aspects collectively contribute to enhancing the tribological performance of the TiBN-Cu/PAO composite system. A durable, stable, and efficient TiBN-Cu/PAO solid-liquid composite lubrication system under in-situ and ambient conditions was achieved in this paper.

In-situ Formed Carbon Based Composite Tribo-Film with Ultra-High Load Bearing Capacity

Tribo-Induced Catalytically Active Oxide Surfaces Enabling the Formation of the Durable and High-Performance Carbon-Based Tribofilms

In-situ synthesizing carbon-based film by tribo-induced catalytic degradation of PAO for reducing friction and wear.

Enhancing tribological properties of carbon-based films through catalytic Ni 3 C

Multilayer Tribofilm: An Unique Structure to Strengthen Interface Tribological Behaviors

Superior Tough, Highly Wear Durable and Self-Lubricating Epoxy Composite Co-Enhanced by Soft and Hard Nanomaterials

Casting of regulable nanostructured transfer film by detaching nanofiller from the composite into the tribosystem – A strategy to customize tribological properties

Tribochemical Behaviors of Onion-like Carbon Films As High-Performance Solid Lubricants with Variable Interfacial Nanostructures

In-situ Formed Graphene Providing Lubricity for the FeCoCrNiAl Based Composite Containing Graphite Nanoplate

Tribo-induced Evolution of Nodular Supporting Structures Providing High-Performance Solid Lubricants in Carbon Nanotube Coated Films

Effect of Nickel Acetyl Acetonate as Lubricant Additive in Base Oils with Different Molecular Structure on In-Situ Formation and Tribomechanism of Carbon-Based Tribofilms of Steel-Steel Sliding Pair

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Preparation and Tribological Properties of the Friction Induced Mo-based Film

Adaptive TiN-Cu/PAO Composite Lubrication System: the Tribocatalysis-induced PAO6 Transferring to Amorphous Carbon

In-situ tribo-induced formation of superb lubricious carbon-based tribofilms on the catalytical active MoN-Ag film surfaces

Tribological properties and lubrication mechanism of in situ graphene-nickel matrix composite impregnated with lubricating oil

In Situ‐Formed Ultralow Wear Tribofilms Induced by Poly(Acrylic Acid)‐co‐MXene‐Modified Polymer‐Like Carbon Films

Tribo-catalysis Triggered the In-Situ Formation of Amphiphilic Molecules to Reduce Friction and Wear

Stable and Durable TiBN-Cu/polyalphaolefin(PAO) Composite Lubrication System: Enhanced Lubrication Performance Through PAO Physicochemical Adsorption

Characterization and nano-mechanical properties of tribofilms using Cu nanoparticles as additives

Tribological and Mechanochemical Properties of Nanoparticle-Filled Polytetrafluoroethylene Composites under Different Loads