Abstract:Synthesis methods of composites. Copper‐based metal–organic frameworks is anticipated to find applications in the field of friction materials owing to its plentiful surface‐active groups and distinctive framework structure. In this study, copper‐based metal–organic frameworks was synthesized through ultrasound‐assisted method and incorporated alone into carbon fiber reinforced epoxy composites or together with SiO2 nanoparticles towards the goal of improving the composites' friction and wear properties. It is revealed that copper‐based metal–organic frameworks alone cannot improve the friction and wear of carbon fiber reinforced epoxy composites simultaneously. The combination of copper‐based metal–organic frameworks and SiO2 nanoparticles was more effective in enhancing both the mechanical and tribological properties of studied composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s. Additionally, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3 N/m. Through morphological and chemical analysis on the worn surfaces and transfer films, the functioning mechanism of copper‐based metal–organic frameworks in modifying the mechanical and tribological properties was discussed. It was discovered that a tribological synergy exists between short carbon fibers, copper‐based metal–organic frameworks, and SiO2 fillers, leading to a shift in the wear mechanism of the composite materials from abrasive wear to adhesive wear. Concurrently, a shear‐prone transfer film forms on the surface of the counter steel surfaces. Findings of the present study pave a new route of designing high performance epoxy based tribo‐composites by using metal–organic frameworks. Highlights Cu‐BDC nanosheets were synthesized using ultrasound‐assisted techniques and incorporated as tribological fillers in EP composites. The combined use of Cu‐BDC, SiO2, and SCF fillers synergistically enhances the mechanical and tribological properties of EP composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3N/m. During the sliding friction process of the composite materials, Cu‐BDC and SiO2 play a crucial role in reducing SCF pull‐out wear through their anchoring effect. The dynamic coordination bond structure of Cu‐BDC contributes to the formation of uniform and continuous transfer films on counter metal surfaces.

Casting of regulable nanostructured transfer film by detaching nanofiller from the composite into the tribosystem – A strategy to customize tribological properties

Tribological and Mechanochemical Properties of Nanoparticle-Filled Polytetrafluoroethylene Composites under Different Loads

Influence of the Matrix Material and Tribological Contact Type on the Antifriction Properties of Hybrid Reinforced Polyimide-Based Nano- and Microcomposites

Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite

The effects of filler type on the friction and wear performance of PEEK and PTFE composites under hybrid wear conditions

Ultralow Friction and Wear of Polymer Composites under Extreme Unlubricated Sliding Conditions

Composite Lubricating Films with Silane Coupling Agent-Modified Carbon Nanotubes on a Silicon Substrate with Enhanced Wear-Resistant Properties

Development of polymer film coatings with high adhesion to steel alloys and high wear resistance

Coupled effect of filler and countersurface roughness on the tribological performance of the PEEK-PTFE-steel hybrid wear system

How moisture driven mechanochemistry stabilizes transfer film adhesion and cohesion in ultralow wear PTFE composite

Tribo-induced Evolution of Nodular Supporting Structures Providing High-Performance Solid Lubricants in Carbon Nanotube Coated Films

Effect of Various Type of Nanoparticles on Mechanical and Tribological Properties of Wear-Resistant PEEK + PTFE-Based Composites

Tribological Performance and Enhancing Mechanism of 3D Printed PEEK Coated with In Situ ZIF-8 Nanomaterial

Improving the morphology of terrace-like transfer film to reduce wear rate of graphite/PTFE composites via filling low content silica

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Comparison Of Tribological Performances Of High Density Polyethylene Enhanced With Carbon Nanofibers

Strengthening mechanism of different morphologies of nano-sized MSH on tribological performance of phosphate/MoS2 bonded solid lubricating coatings

Interface construction of micro/nano hierarchical structure to enhance the tribological performance of carbon fabric/phenolic composite

Tribological synergy of copper‐based metal–organic frameworks, carbon fibers and SiO2 in modifying the friction and wear properties of epoxy composites

Combined effects of interface modification and micro-filler reinforcements on the thermal and tribological performances of fabric composites

Self-lubricated nanoporous TiO 2 -TiN films fabricated on nanocrystalline layer of titanium with enhanced tribological properties