Tribological Performance and Enhancing Mechanism of 3D Printed PEEK Coated with In Situ ZIF-8 Nanomaterial

Xinchao Wang,Jiale Hu,Jiajia Liu,Yixin Liang,Lan Wu,Tie Geng,Shihua Liu,Yonggang Guo

DOI: https://doi.org/10.3390/polym16081150

IF: 5

2024-04-20

Polymers

Abstract:Polyether ether ketone (PEEK) is esteemed as a high-performance engineering polymer renowned for its exceptional mechanical properties and thermal stability. Nonetheless, the majority of polymer-based lubricating materials fail to meet the contemporary industrial demands for motion components regarding high speed, heavy loading, temperature resistance, and precise control. Utilizing 3D printing technology to design and fabricate intricately structured components, developing high-performance polymer self-lubricating materials becomes imperative to fulfill the stringent operational requirements of motion mechanisms. This study introduces a novel approach employing 3D printing technology to produce PEEK with varying filling densities and conducting in situ synthesis of zeolitic imidazolate framework (ZIF-8) nanomaterials on its surface to enhance PEEK's frictional performance. The research discusses the synthetic methodology, characterization techniques, and tribological performance evaluation of in situ synthesized ZIF-8 nanomaterials on PEEK surfaces. The findings demonstrate a significant enhancement in frictional performance of the composite material under low-load conditions, achieving a minimum wear rate of 4.68 × 10−6 mm3/N·m compared to the non-grafted PEEK material's wear rate of 1.091 × 10−5 mm3/N·m, an approximately 1.3 times improvement. Detailed characterization and analysis of the worn surface of the steel ring unveil the lubrication mechanism of the ZIF-8 nanoparticles, thereby presenting new prospects for the diversified applications of PEEK.

polymer science

What problem does this paper attempt to address?

The paper aims to address the limitations of polyether ether ketone (PEEK) materials in terms of friction and wear performance. Although PEEK is widely used in industries such as aerospace, automotive, electronics, and medical devices due to its excellent mechanical properties and thermal stability, it still has deficiencies in friction and wear performance under high-speed, heavy-load, temperature tolerance, and precise control requirements. To solve this problem, researchers used 3D printing technology to prepare PEEK samples with different filling densities and performed in-situ synthesis of zeolitic imidazolate framework (ZIF-8) nanomaterial modification on their surfaces.

Through this method, researchers found that the modified PEEK composites exhibited significantly improved friction performance under low load conditions, with a minimum wear rate of 4.68×10^-6 mm³/N·m, which is approximately 1.3 times better than the unmodified PEEK material (wear rate of 1.091×10^-5 mm³/N·m). Additionally, detailed characterization and analysis of the wear surfaces revealed the lubrication mechanism of ZIF-8 nanoparticles, showcasing new prospects for PEEK materials in various engineering applications.