Abstract:The hybrid wear system consisting of independent polyether-ether-ketone (PEEK) and polytetrafluoroethylene (PTFE) components sliding together against steel has been proven to improve the tribological performance of PEEK without compromising its excellent mechanical properties. In the present work, the effect of the countersurface roughness upon the tribological performance of the hybrid wear system is investigated. In a dual-pin-on-disk tribometer, steel rings with various roughness (Ra = 0.04–0.5) are introduced to PEEK-PTFE/Al 2 O 3 -steel (PPAS) hybrid wear systems containing hard nano particles and to PEEK-PTFE/brass-steel (PPBS) hybrid wear systems containing soft micron-scale particles. The morphologies of the worn surfaces demonstrate that the outstanding tribological performance of the hybrid wear system is closely related to the tribo-chemistry and the formation of tribofilms, which jointly depend on the properties of the fillers and on the roughness. The PPAS hybrid wear system is more suitable for low roughness conditions, as the wear debris containing nano-alumina particles will be pressed into the deep processing grooves of the steel surface, thereby hindering the occurrence of the tribo-chemical reaction. By contrast, the PPBS hybrid wear system exhibits good performance under high roughness conditions. With a smooth countersurface, the micron-sized brass particles will deposit onto the worn PTFE surface, and lead to severe abrasive wear on the countersurface, thereby hindering the formation of a transfer film. However, both the PPAS and the PPBS system provide exceptional tribological performance under moderate roughness conditions, due to the formation of high-quality fluorine-based tribofilms on each worn surface with the assistance of tribo-chemistry.

Tribological behavior of PEEK components with compositionally graded PEEK/PTFE surfaces

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Tribological Performance Study of Low-Friction PEEK Composites under Different Lubrication Conditions

Tribological Properties of PEEK and Its Composite Material under Oil Lubrication

The effects of filler type on the friction and wear performance of PEEK and PTFE composites under hybrid wear conditions

Study of Friction and Wear Characteristics of PEEK by Reciprocating Sliding Experiment and Temperature Dependences Simulation

Tribological Performance and Enhancing Mechanism of 3D Printed PEEK Coated with In Situ ZIF-8 Nanomaterial

Performance and mechanisms of different tribological thermoplastic composites in sliding contact with steel

Coupled effect of filler and countersurface roughness on the tribological performance of the PEEK-PTFE-steel hybrid wear system

Tribological Behavior of Reinforced PTFE Composites and Un-Reinforced Polyketone-Based Materials against Coated Steel

Effect of CaCO_3 Whisker and PTFE on Dry Friction Behavior of PEEK

Tribological Properties Of Polytetrafluoroethylene-Based Composite In Different Lubricant Media

Friction and wear performance of polyether ether ketone (PEEK) polymers in three lubrication regimes

Preparation and Tribological Behaviors of Lubrication-Enhanced PEEK Composites

A Mechanism-Based General Theory for Friction of PTFE/PEEK Composite: Effects of PTFE Morphology and Composite Microstructure

Tribological properties of PEEK-based composite coating prepared by thermal spraying

Tribological Behavior of Polytetrafluoroethylene Coating Reinforced with Black Phosphorus Nanoparticles

Tribological Behaviors of Carbon Fiber–Reinforced PEEK Sliding on Ion-Nitrided 2Cr13 Steel Lubricated with Tap Water

Comparative Study of Friction and Wear Performance of PEK, PEEK and PEKK Binders in Tribological Coatings

Friction Coefficient and Wear of PEEK-PTFE Hybrid Radial Ball Bearings under Dry Conditions

Study on the Tribological Behaviors of Different PEEK Composite Coatings for Use As Artificial Cervical Disk Materials