Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Axial piston pumps, serving as the essential power component in electro-hydrostatic actuators (EHA), play a crucial role in achieving advanced actuation by ensuring high efficiency and reliability. The cylinder block/valve plate interface, which is the greatest contact area inside the axial piston pump, significantly affects both leakage and energy dissipation. The interface experiences significant friction loss and severe wear in aerospace applications, primarily due to the rapidly changing mixed and boundary lubrication conditions under a wide range of speed and pressure. Therefore, to improve the efficiency and reliability of electro-hydrostatic actuators, strengthening the cylinder block/valve plate interface is a key problem to overcome. Previous studies have demonstrated that the utilization of soft-to-hard matching materials enhances the friction characteristics of the interface, but it also results in relatively severe wear on the soft material. Therefore, in this study, we propose the concept of employing hard-to-hard matching materials as a strategy to mitigate wear in axial piston pumps. An optimized friction simulation test apparatus is adopted, which contains a simulated piston structure to take the piston stirring effect into consideration. Experimental results show that the implementation of hard-to-hard materials leads to a substantial improvement in the wear resistance of the interface under a wide range of rotational speed (300–6000 rpm). The wear depths of the TiAlN/TiAlN (hard-to-hard) matching material are only 28.6%~34.7% of the tin bronze/TiAlN (soft-to-hard) matching material. Besides, compared with traditional tin bronze/nitrided (soft-to-hard) matching material, the hard-to-hard matching materials improve both friction and wear performance. The hard-to-hard matching materials provide a novel approach to reinforce the cylinder block/valve plate interface, and thus to promote volumetric efficiency and extend the service life of the axial piston pump.

A study on improving friction and wear performance of bearing bush in radial piston hydraulic motor

Friction and Wear of Self-Mated SiC and Si 3 N 4 in Green Water-Based Lubricant

Researches on Friction Performance of Water-Lubricated Polymer Composite Journal Bearings Based on Experiments

Investigation on the Radial Micro-Motion about Piston of Axial Piston Pump

Study on the Friction Performance of Textured Surface on Water Hydraulic Motor Piston Pair

The effects of filler type on the friction and wear performance of PEEK and PTFE composites under hybrid wear conditions

The Difference in Tribological Characteristics between CFRPEEK and Stainless Steel under Water Lubrication in Friction Testing Machine and Axial Piston Pump

Research on maintenance-free design and low friction characteristics of industrial robot sliding components

Tribological Properties of PEEK and Its Composite Material under Oil Lubrication

Tribological Performance Study of Low-Friction PEEK Composites under Different Lubrication Conditions

Experimental Study on Material Properties of Bearing Bush of Water Lubricated Bearing

Study on Friction and Wear Performance of Sliding Metal Seal Materials Under Reciprocating Motion

Influence of Counter Surface Roughness and Lay on the Tribological Behaviour of Self-Lubricating Bearing Materials in Dry Sliding Conditions at High Contact Pressures

Tribological Performance and Enhancing Mechanism of 3D Printed PEEK Coated with In Situ ZIF-8 Nanomaterial

Study on tribological properties of boronized and textured composite surface and its application on camshaft connecting-rod type hydraulic motor

Tribological characteristics of hard-to-hard matching materials of cylinder block/valve plate interface in electro-hydrostatic actuator pumps

Surface analysis of iron-based self-lubricating composite under oil lubrication

Tribological Properties Of Polytetrafluoroethylene-Based Composite In Different Lubricant Media

Research on friction and wear behaviors of different solid lubricant coatings on aluminum-based piston skirts

Coupled effect of filler and countersurface roughness on the tribological performance of the PEEK-PTFE-steel hybrid wear system

Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions