Abstract:Polymers are widely used in bearing applications. In the case of water-lubricated stern tube bearings, thermoplastic polyurethane (TPU)-based composites are used due to their excellent wear resistance, corrosion resistance, and tunable mechanical properties. Their tribological performance, however, depends on operating conditions. In this work, TPU was blended with carbon fiber, graphene platelet, and ultra-high molecular weight polyethylene (UHMWPE). Friction tests of TPU based-composites against copper countersurface were carried out in water to mimic the actual operating conditions of the bearing. Most of the resulting contacts were in the boundary lubrication regime, in which friction was attributed to both contact mechanics of asperities as well as water lubrication. Our results show that the viscoelasticity of TPU has a considerable impact on its tribological performance. Water lubrication at 50 °C promotes the softening of polymer surface material during sliding, resulting in higher fluctuation in the coefficient of friction and wear loss. This is attributed to the reduced thermomechanical properties. In addition, Schallamach waviness is observed on worn surface. The tribological properties of TPU are significantly improved by the inclusion of carbon fiber, graphene platelet, and UHMWPE. The formation of graphene transfer-layers and UHMWPE transfer film reduces friction and wear loss, while the inclusion of carbon fiber enhances wear resistance due to improved mechanical properties and load bearing capacity.

Researches on Friction Performance of Water-Lubricated Polymer Composite Journal Bearings Based on Experiments

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Experimental Study on Friction Characteristics of Water-lubricated Composite-material Bearings

A study on improving friction and wear performance of bearing bush in radial piston hydraulic motor

Investigation of Tribological Properties of PI/FEP Laminated Composites Under Dry Sliding, Water- and Oil-Lubricated Conditions

Tribological Performance Study of Low-Friction PEEK Composites under Different Lubrication Conditions

Frication and Wear Performance of Filled PTFE Composite and Stainless Steel under Water Lubrication

The effects of filler type on the friction and wear performance of PEEK and PTFE composites under hybrid wear conditions

Experimental Study on Material Properties of Bearing Bush of Water Lubricated Bearing

Study on Tribological Behavior of Water-Lubricated Bearings

Experimental investigation on dry frictional behavior of the two self-lubricating composites under heavy loading conditions

Study of the Lubrication Performance of Water-Lubricated Journal Bearings with Cfd and Fsi Method

Tribological Properties Of Polytetrafluoroethylene-Based Composite In Different Lubricant Media

Ultralow friction of PEEK composites under seawater lubrication

Tribological and physical properties of PTFE-NBR self-lubricating composites under water lubrication

Tribological evaluation of thermoplastic polyurethane-based bearing materials under water lubrication: Effect of load, sliding speed, and temperature

Tribological behavior of PTFE/Nomex/phenolic composite lubricant under cold forming condition in the bearing assembly process

Enhancement of the Water-Lubricated Tribological Properties of Hybrid PTFE/Nomex Fabric Laminate Composite via Epoxy Resin and Graphite Filler

Tribological Investigation of PTFE Composite Filled with Lead and Rare Earths-Modified Glass Fiber

Facile Fabrication and Tribological Properties of Self-Lubricating Polyurethane Based on Expanded Graphite/Paraffin for Water Lubricated Bearings

Tribological and Vibration Properties of Three Different Polymer Materials for Water-Lubricated Bearings