Abstract:In this study, the piston-cylinder liner was treated with single glow photoionization sulfurization of a cast aluminum alloy (AlSi10Mg), and the effect of the spherical crown texture on frictional properties of the piston-cylinder liner were investigated before and after the sulfurization treatment. The treated specimens were characterized and evaluated via microscopic morphological analysis, three-dimensional morphological analysis, X-ray diffraction (XRD), thin film diffraction, microhardness testing, and friction wear experiments. Fluent fluid analysis software was used to develop a flow field simulation model for the spherical crown texture. Results of the study showed that the average friction coefficients of the specimens treated with sulfur infiltration were all lower than those of untreated specimens, and the low friction coefficients were closely related to the laminar structure and weak interfacial bonding of the sulfur infiltration layer. The spherical crown structure effectively affected the stree distribution on surface of the specimens uniformly, which improved the bearing capacity and durability of the specimens, and the surface texture helped reduce the contact area and store the debris generated during the wear process, thus improving the friction performance. Mechanical stamping caused material aggregation on the edges of the weave, which increased the hardness of the edges and thus reduces the increase in wear around the weave. The surface microstructure of the specimens was effectively improved after sulfurization treatment, leading to higher wear resistance for the sulfurized specimens. Given the relative lack of research on the composite ionic sulfurization of piston-cylinder liner spherical crown texture at home and abroad, this experiment provides data support for this direction. The results provide beneficial clues for the design and optimization of the piston-cylinder liner spherical crown structure.

Research on friction and wear behaviors of different solid lubricant coatings on aluminum-based piston skirts

Effects of the Piston Skirt's Surface Structure on Coating Quality and Friction Functions

Characterization and Tribological Properties of W-Ti-N/Al-Si Multilayer Surface Coating for Iron Alloy Pistons

An investigation of fretting wear behaviors of bonded solid lubricant coatings

Author Response for "adaptability of Piston Skirt Coatings on the Tribological Performance of Heavy-Duty Diesel Engine under Low Viscosity Lubricant"

Tribological performance of MoS2 coating on slipper pair in axial piston pump

Tribological Performance of MoS 2 Coating on Slipper Pair in Axial Piston Pump

Analysis of the lubrication process with composition of solid lubricants of laser-modified sliding surfaces

A study on improving friction and wear performance of bearing bush in radial piston hydraulic motor

Tribological Properties of a Sliding Joint with an a-C:H:W Coating under Lubrication Conditions with PAO8 Oil and the Addition of 2% MoS2 Nanoparticles

Tribological Properties of Al2O3/Graphite-Al2O3 Laminated Composites under Water Lubrication Conditions

MXene/graphene oxide nanocomposites for friction and wear reduction of rough steel surfaces

Preparation and tribological properties of multi-layer graphene/silicon dioxide composites-based solid lubricant coatings at elevated temperatures

Tribological performance of Mn3(PO4)2 coating and PC/MoS2 coating in Rolling–Sliding and pure sliding contacts with gear oil

Wear characteristics and sustainability of WS2 solid lubricant deposited layer on Al 6061-T6 substrate under the dry sliding conditions

Effect of spherical crown texturing and ionized sulfur infiltration on the tribological performance of piston-cylinder liner

Effects of Coating and Lubrication on Friction and Wear for Metal-to Metal Application

Study on Friction and Wear Performance of Sliding Metal Seal Materials Under Reciprocating Motion

Microstructures and friction-reduction performances of the graphite coatings

Tribological Dependence of the High-Performance Ferrous-Based Coating on Different Coating Counterparts in Engine Oil

Reciprocating sliding friction behavior and wear state transition mechanism of cylinder liner and piston ring