Abstract:Abstract The running-in of cylinder liner-piston rings (CLPRs) is the most important process that must be performed before a marine diesel engine can be operated. The quality of running-in directly affects the reliability of a CLPR. The surface texture of a CLPR has been proven to significantly affect its lubrication performance. In this study, the tribological behavior of a CLPR during running-in is investigated. Three types of surface textures are generated on the CLPR via laser processing: dimple texture on piston rings, groove texture on cylinder liners, and co-texture on both sides. Subsequently, a series of tests are performed on a slice tester. A load of 300 N (1.64 MPa) is applied, and two speeds (50 and 100 rpm) are adopted. The CLPR running-in quality is characterized based on three parameters, i.e., the friction coefficient, contact resistance, and wear topography. Experimental results show that, compared with a non-textured surface, the three types of surface textures mentioned above improved the friction performance during running-in. The lubricant supply capacity of the dimple texture on the piston ring, as a mobile oil reservoir, is stronger than that of the groove texture on the cylinder liner serving as a static oil reservoir. By contrast, the wear resistance of the dimple texture, as a movable debris trap on the piston ring, is weaker than that of the groove texture on the cylinder liner, which serves as a static debris trap. It is demonstrated that the co-texture combines the advantages of dimples and groove textures. Compared with non-textured surfaces, the friction coefficient decreased the most at 100 rpm (44.5%), and the contact resistance improved the most at 50 rpm (352.9%). The coupling effect provides the surface with improved running-in quality by optimizing the tribological performance, particularly at the dead center. This study provides guidance for the tribological design and manufacturing of CLPR in marine diesel engines.

Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions

The friction of surface textured cylinder liner segments modified by Direct Laser Writing and Direct Laser Interference Patterning processes

Effects of different surface textures on tribological performances of the cylinder liner-piston ring: An experimental study

Effects of Liner Surface Textures on the Tribological Performance of Different Production Piston Rings

Effects of the array modes of laser-textured micro-dimples on the tribological performance of cylinder liner–piston ring

Experimental Research on the Wall-Wetting Effects on the Frictional Property of the Cylinder Liner–piston Ring Pair

Impact of laser surface texturing (LST) on the tribological characteristics of piston rings and cylinder liners – a review. Part 1: development of LST technology

Adaptability of Laser Textured Liner to the Effects of Methanol Diluting Oil on Tribological Properties

Influence of Different Surface Texture Parameters on the Contact Performance of Piston Ring-Sleeve Friction Pair of Hydraulic Cylinders

Lubrication Adaptability to the Variations of Combustion Modes by Texturing Cylinder Liner in Engines

An experimental study on tribological properties and air tightness of co-textured cylinder liner-piston ring on an engine tester

Effects of textured cylinder liner piston ring on performances of diesel engine under hot engine tests

Tribological behavior of co-textured cylinder liner-piston ring during running-in

Effects of the Piston Skirt's Surface Structure on Coating Quality and Friction Functions

Tribological behaviors of laser textured surface under different lubrication conditions for rotary compressor

The Friction And Wear Behavior Of Laser Textured Surfaces In Non-Conformal Contact Under Starved Lubrication

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Influence of different loads and temperatures on solid lubricant-filled micro-dimples existing on both cylinder liner and piston ring

Researches of Cast Iron Piston Rings Strengthened by Laser

Molecular Dynamics Investigation on Micro-Friction Behavior of Cylinder Liner-Piston Ring Assembly

Research on the Profile Design of Surface Texture in Piston Ring of Internal Combustion Engine