Abstract:The tribological behavior of Mo-sprayed piston r ing sliding against grey cast iron cylinder liner under the lubrication of a ful ly formulated petroleum based engine oil SJ/5W-30 containing molybdenum dithioc arbomate (MoDTC) or molybdenum dithiophosphate (MoDTP) was investigated with an Optimol-SRV test rig. The testing temperatures were controlled at 125 ℃ and 32 0 ℃ to simulate the real engine operating conditions.The worn surfaces of the p iston ring and cylinder liner were observed and analyzed by means of scanning el ectron microscopy (SEM) and X-ray photoelectron spectroscopy(XPS). It was obser ved that the frictional behavior of both MoDTC and MoDTP depends heavily on the experimental temperature; MoDTC is effective in decreasing the friction coeffici ent and wear rate at a relatively extended test duration while MoDTP shows frict ion-reduction ability only at relatively high temperatures. It can be seen from the SEM observations of the worn piston ring and cylinder liner surfaces that t he set test temperature range has also strong impact on both the wear severity a nd the wear mechanisms in the contact surface. When it rises from 125 ℃ to 320 ℃, the wear becomes more serious, and the wear mechanism changes from abrasion to adhension. In addition, the chemical interaction between the lubricant conta ining organo-molybdenum and the tribocontact surfaces plays a crucial role in f riction reducing or antiwear film formation, which is dependent on the tribochem ical characteristics of the active ferrous materials and the applied friction mo difiers such as MoDTC or MoDTP. XPS analysis of the worn cylinder liner surfaces indicates that the resultant tribochemical films are mainly composed of iron ox ides, molybdenum oxide, iron sulfide, molybdenum disulfide, and zinc and iron ph osphates. The proportion of these species is a function of both the specific fri ction modifiers used and the experimental temperature. It is supposed that the b etter friction-reduction and wear-resistant actions of MoDTC at 125 ℃ is attr ibuted to the higher content of MoS2 and other wear-resistant compounds gener ated on the worn cylinder liner surfaces.

Adaptability of Laser Textured Liner to the Effects of Methanol Diluting Oil on Tribological Properties

Study on Tribological Properties of Laser-Textured Plunger in Methanol Engine

Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions

Lubrication Adaptability to the Variations of Combustion Modes by Texturing Cylinder Liner in Engines

Experimental Research on the Wall-Wetting Effects on the Frictional Property of the Cylinder Liner–piston Ring Pair

Effects of Liner Surface Textures on the Tribological Performance of Different Production Piston Rings

The friction of surface textured cylinder liner segments modified by Direct Laser Writing and Direct Laser Interference Patterning processes

Effects of the array modes of laser-textured micro-dimples on the tribological performance of cylinder liner–piston ring

Effect of MoDTC and MoDTP on Tribological Behavior of Cylinder Liner/Piston Ring

Influence of different loads and temperatures on solid lubricant-filled micro-dimples existing on both cylinder liner and piston ring

Combined Effect of a Laser Cladded Coating and Surface Texture on Tribological Performance Under Dry Sliding and Starved Lubrication

Influence of Oxidative Degradation of Lubricant and Anti-Friction Modifier on Tribological Behavior of Cylinder Liner/Piston Ring

Effects of different surface textures on tribological performances of the cylinder liner-piston ring: An experimental study

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Laser Melting and Surface Texture Technology: Effect on Friction Properties

An experimental study on tribological properties and air tightness of co-textured cylinder liner-piston ring on an engine tester

Synergistic Effect of Elliptic Textures and H-DLC Coatings for Enhancing the Tribological Performance of CuAl10Fe5Ni5 Valve Plate Surfaces

Tribological behaviors of laser textured surface under different lubrication conditions for rotary compressor

Experimental Study on Dissolution Stability and Dispersion and their Influence on Tribological Properties for Reducing Friction and Prolonging Life of Armored Vehicle Engine Lubricating Oil Additives

Effects of textured cylinder liner piston ring on performances of diesel engine under hot engine tests

Tribological behavior of co-textured cylinder liner-piston ring during running-in