Abstract:In order to combine the anti-friction performance of micro-texture with the lubrication effect of solid self-lubricating phase, and further improve the tribological performance of the coating under dry friction conditions. Fe 5 /10%WC/5% MoS 2 self-lubricating coating was prepared by laser cladding technology, and then elliptical micro-textures with different arrangement angles (0°, 45°, 90°) were processed on the surface of the coating by laser micro-texture technology. The friction and wear behavior of the micro-texture coating was investigated from the perspectives of friction coefficient, volume wear loss, and wear morphology. The improvement effect of micro-texture on the wear resistance of the coating was discussed, and the synergistic anti-friction mechanism of the self-lubricating coating and surface micro-texture was explored. The results show that the friction coefficient and volume loss of the 0° textured coating are the smallest under the external load of 70 N, and the wear mechanism is characterized by slight abrasive wear. The 45° textured coating exhibits local adhesive traces in addition to a few micro-cutting furrows, suggesting a combination of slight abrasive wear and adhesive wear. The friction coefficient and volume loss of the 90° textured coating are the largest and the volume loss is greater than that of the non-textured coating. The wear mechanism is dominated by fatigue wear, accompanied by slight abrasive wear and adhesive wear. During the friction and wear process, the elliptical micro-pits can promptly capture wear debris, reducing the continuous damage to the coating. Additionally, the solid lubricant (MoS 2 ) stored in the micro-pits can provide continuous lubrication to the friction contact area and effectively decrease the friction coefficient.

Combined Effect of a Laser Cladded Coating and Surface Texture on Tribological Performance Under Dry Sliding and Starved Lubrication

Additional Tribological Effect of Laser Surface Texturing and Diamond-Like Carbon Coating for Medium Carbon Steel at Near Room Temperature

Influence of Micro-Texture on the Tribological Behavior of WC/MoS2/Fe-Based Alloy Coating by Laser Cladding

Effect of Surface Micro-Texturing on the Tribological Properties of TiB-TiC/Co-Based Coatings by Laser Cladding

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

High-temperature tribological properties of AlCrN coatings deposited on textured surfaces under dry friction

Effect of ion beam etching on the tribological performance of laser textured Co-Cr-Mo alloy

Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramic

Effect of Triangular Texture on the Tribological Performance of Die Steel with Tin Coatings under Lubricated Sliding Condition

Investigation on the Tribological Characteristic of Laser Clad Layer

Surface textures fabricated by laser and ultrasonic rolling for improving tribological properties of TiAlSiN coatings

The Friction And Wear Behavior Of Laser Textured Surfaces In Non-Conformal Contact Under Starved Lubrication

Combining Carbon Nanoparticle Coatings and Laser Surface Texturing for Enhanced Lubricity Under High Loads

Effect of Temperature and Load on Tribological Behavior in Laser-Cladded FeCrSiNiCoC Coatings

Effect of High-Speed Powder Feeding on Microstructure and Tribological Properties of Fe-Based Coatings by Laser Cladding

Tribological Dependence of the High-Performance Ferrous-Based Coating on Different Coating Counterparts in Engine Oil

Effect of Cu-doping on tribological properties of laser-cladded FeCoCrNiCu x high-entropy alloy coatings

Dry Wear Behaviors of Wear Resistant Composite Coatings Produced by Laser Cladding

Anti-Wear Property of Laser Textured 42CrMo Steel Surface

Tribofilm Formation and Friction Reduction Performance on Laser-Textured Surface with Micro-Grooved Structures

Interesting ' island-like' microstructure and tribological evaluation of Al 1.5 CrFeNiWTi 0.5 high entropy alloy coating manufactured by laser cladding