Abstract:The decrease of both friction and wear is very crucial for reducing oil consumption and the associated environmental pollution. Accordingly, the search continues for novel materials, coatings, lubricants, and systems constituted by the aforementioned ones that can potentially reduce friction and wear. In this paper, a solid-liquid composite lubrication system was constituted by combining g-C3N4 nanosheets as the lubricating oil additives with Ti-DLC film, to achieve a green lubricant providing extreme anti-wear and friction reduction functionality. Tribological properties of the composite lubrication system with different concentrations of g-C3N4 were evaluated using a ball-on-disc sliding friction tester at different normal loads. The results show that both the friction coefficient and wear rate first decreases and then increases with the increase of the g-C3N4 concentration. The lubricant with 1 wt% g-C3N4 exhibits the optimal lubricant property with the friction coefficient of 0.076, 0.078 and 0.082, reducing by nearly 24%, 20%, and 12% compared with base oil for the normal loads of 50 N, 100 N, and 200 N, respectively. However, further increase in the concentration of g-C3N4 results in significant increase in the friction and wear of the tracks. The wear rates show no marked variation with the increasing load, indicating that g-C3N4 nanosheets possess a wide load adaptation range in wear-resistance. As environmentally friendly oil additives, g-C3N4 nanosheets can effectively improve the tribological property of the composite lubrication system. Based on the characterizations of both the Ti-DLC film and wear scars by SEM, XPS, non-contact 3D surface profiler and EDS, the synergistic lubrication mechanism of the g-C3N4 nanosheets and Ti-DLC film is also proposed.

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Tribological properties study of spherical calcium carbonate composite as lubricant additive

Tribological Behaviors of Compound Nanometer Particles as Additives in Lubricating Oil

Tribological Property of Biocarbon-Based Magnesium Silicate Hydroxide Nanocomposite as Lubricant Additive at Different Concentrations of Additive and Dispersant

Nickel/Multi-walled Carbon Nanotube Nanocomposite Synthesized in Supercritical Fluid As Efficient Lubricant Additive for Mineral Oil

Significant Enhancement of Tribological Performance of Carbon Fabric/phenolic Composites Via Interfacial Modification and Use of a Lubricant Additive

The Tribological Behaviors and Mechanism of Carbon Nanotubes as Oil Additive

Superior Lubricity and Antiwear Performances Enabled by Porous Carbon Nanospheres with Different Shell Microstructures

TRIBOLOGICAL PERFORMANCE OF MODIFIED FLOCCULENT GRAPHITE AS LUBRICANT ADDITIVES

Tribological Behavior of Carbon Nanotubes Composite Coatings at Different Frictional Combination

Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite

Boosting the Tribological Properties by Developing A G-C3n4/rgo Nanocomposite As Lubricant Additive

Carbon Dot-Based Nanofluids As Additives for Mechanical Lubrication

Tribological Properties of CNT microspheres as a Lubricant Additive

Green Oil Additive G-C3n4: a Feasible Strategy to Enhance the Tribological Properties of DLC Film

Investigation on Tribological Properties of Lubricating Oil with Carbon Nanotubes Additive

Development of Nano Biochar As a Lubricating Oil Additive for Tribological Applications

An Investigation on Tribological Properties and Lubrication Mechanism of Graphite Nanoparticles as Vegetable Based Oil Additive

Effect of Multi-Walled Carbon Nanotubes on Tribological Properties of Lubricant

Tribological Performance of Attapulgite Nano-fiber/Spherical Nano-Ni As Lubricant Additive

Soft-nanocomposite lubricants of supramolecular gel with carbon nanotubes