Research progresses of nanomaterials as lubricant additives

Zhengquan Jiang,Yankun Sun,Bokang Liu,Laigui Yu,Yuping Tong,Mingming Yan,Zhongzheng Yang,Yongxing Hao,Linjian Shangguan,Shengmao Zhang,Weihua Li

DOI: https://doi.org/10.1007/s40544-023-0808-9

IF: 4.924

2024-03-13

Friction

Abstract:Abstract Friction and wear are unavoidable in mechanical movement. The use of lubricants with nano-additives can effectively reduce friction and wear, which is of great significance to saving energy and protecting the environment. At present, great progress has been made in the scientific research and industrial application of nano-additives for lubricants. This paper mainly introduces the types of nano-additives for lubricants (such as carbon nanomaterials, nano-metals, nano-oxides, sulfides, complexes, polymers, etc.), the tribological properties of lubricants with different components of nano-additives, and the lubrication mechanisms of the nano-additives (including tribofilm formation, rolling ball bearing effect, repairing effect, polishing effect, and synergistic effect). It also deals with the dispersion of nano-additives in lubricants and the influences of their particle size and microstructure on the tribological properties of lubricants. This review outlines the performance requirements of nano-additives in different lubrication states, discusses the use of nano-additives in challenging working conditions, and identifies various industrial oil nano-additives with reference to the appropriate options in diverse working environments. Furthermore, the existing problems of nano-additives and their application prospects are summarized. This review, hopefully, would help to shed light on the design and synthesis of novel high-performance nano-additives and promote their application in engineering.

engineering, mechanical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is that in mechanical motion, friction and wear inevitably lead to energy waste and environmental pollution. Especially in the current situation of energy shortage, this problem is particularly prominent. The paper points out that 23% of the world's energy loss is attributed to frictional contact, and most of the energy loss is used to overcome friction. For example, the high friction and wear of engine components will cause a significant decrease in automobile power, and about one - fifth of the power generated by the engine is used to overcome friction. Friction and wear of mechanical parts not only lead to reduced energy efficiency and mechanical equipment failure, but also cause serious environmental pollution and huge economic losses, which need to be urgently solved in today's world.

In order to overcome friction and wear, achieve energy conservation, emission reduction and environmental protection, and improve the performance of mechanical equipment, lubrication is proposed as one of the effective strategies. However, traditional lubricating additives often cannot meet the needs of modern mechanical equipment and will produce toxic soot nanoparticles that are harmful to the environment and human health. Therefore, the paper explores the scientific research progress and industrial application of nanomaterials as lubricant additives, aiming to improve the performance of lubricants through nanotechnology, reduce friction and wear, and thus achieve the purposes of energy conservation, environmental protection and improving equipment performance.

Specifically, the paper mainly introduces the types of nano - additives (such as carbon nanomaterials, nano - metals, nano - oxides, sulfides, composites, polymers, etc.), the tribological properties of nano - additives with different components, and the lubrication mechanisms of nano - additives (including friction film formation, rolling bearing effect, repair effect, polishing effect and synergistic effect). In addition, the dispersibility of nano - additives in lubricants and the influence of their particle size and microstructure on the tribological properties of lubricants are also discussed. The paper also outlines the performance requirements of nano - additives under different lubrication states, discusses the use of nano - additives under harsh working conditions, and proposes appropriate options for different working environments. Finally, the problems existing in nano - additives and their application prospects are summarized, hoping to provide guidance for the design and synthesis of new high - performance nano - additives and promote their application in the engineering field.