Abstract:The decrease of both friction and wear is very crucial for reducing oil consumption and the associated environmental pollution. Accordingly, the search continues for novel materials, coatings, lubricants, and systems constituted by the aforementioned ones that can potentially reduce friction and wear. In this paper, a solid-liquid composite lubrication system was constituted by combining g-C3N4 nanosheets as the lubricating oil additives with Ti-DLC film, to achieve a green lubricant providing extreme anti-wear and friction reduction functionality. Tribological properties of the composite lubrication system with different concentrations of g-C3N4 were evaluated using a ball-on-disc sliding friction tester at different normal loads. The results show that both the friction coefficient and wear rate first decreases and then increases with the increase of the g-C3N4 concentration. The lubricant with 1 wt% g-C3N4 exhibits the optimal lubricant property with the friction coefficient of 0.076, 0.078 and 0.082, reducing by nearly 24%, 20%, and 12% compared with base oil for the normal loads of 50 N, 100 N, and 200 N, respectively. However, further increase in the concentration of g-C3N4 results in significant increase in the friction and wear of the tracks. The wear rates show no marked variation with the increasing load, indicating that g-C3N4 nanosheets possess a wide load adaptation range in wear-resistance. As environmentally friendly oil additives, g-C3N4 nanosheets can effectively improve the tribological property of the composite lubrication system. Based on the characterizations of both the Ti-DLC film and wear scars by SEM, XPS, non-contact 3D surface profiler and EDS, the synergistic lubrication mechanism of the g-C3N4 nanosheets and Ti-DLC film is also proposed.

Composite Lubricating Films with Silane Coupling Agent-Modified Carbon Nanotubes on a Silicon Substrate with Enhanced Wear-Resistant Properties

Chemically Robust Carbon Nanotube – PTFE Superhydrophobic Thin Films with Enhanced Ability of Wear Resistance

Tribo-induced Evolution of Nodular Supporting Structures Providing High-Performance Solid Lubricants in Carbon Nanotube Coated Films

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Interlayer Graphene Oxide/binary Ionic Liquids Composite Lubricating Films with Improved Load-Carrying and Anti-Wear Properties

Self-lubricated nanoporous TiO 2 -TiN films fabricated on nanocrystalline layer of titanium with enhanced tribological properties

Superlubricating UHMWPE Composites with Functionalized Carbon Nanotubes Reinforcement Applicable to Artificial Joints

Self-organized transfer film-induced ultralow friction of Graphene/MoWS4 heterostructure nanocomposite

Casting of regulable nanostructured transfer film by detaching nanofiller from the composite into the tribosystem – A strategy to customize tribological properties

Mo–S–Ti–C Nanocomposite Films for Solid-State Lubrication

Enhancing tribological properties of carbon-based films through catalytic Ni 3 C

Preparation of carbon Nanotube/SiO 2 composite films and their tensile properties in harsh wet environments

Structure and Lubricated Tribological Behavior of Silicon Incorporated Carbon Nitride Composite Films Deposited by Magnetron Sputtering

Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite

Two-step printing Ni3Al/Cr3C2-Ti3SiC2/MoS2 composite films using electrohydrodynamic atomization with a biomimetic shark-skin mask

Silica-Coated N-Doped Porous Carbon Nanospheres as Antiwear and Friction-Reduction Lubricant Additives

Tribological Behavior of High Density Polyethylene Nanocomposites with Silane Treated Carbon Nanofibers

Cellulose-armored “CNTs-soft metal” hybrid nanomaterials to improving the friction-reduction and anti-wear performance of bio-lubricants

Sulfur-Containing Carbon Nanospheres as Lubricant Additives for Antiwear and Friction Reduction

Synergistic Effects of Carbon Nanotube/Nano-MoS2 Hybrid on Tribological Performance of Polyimide Nanocomposite Films

Green Oil Additive G-C3n4: a Feasible Strategy to Enhance the Tribological Properties of DLC Film