Abstract:Nickel acetyl acetonate (Ni(acac) 2 ), a metal-organic compound, was directly dispersed in base oils alkylated naphthalene (AN-5), diisooctyl sebacate (DIOS), poly-α-olefin (PAO6), and mineral oil (liquid hydrocarbon mixtures:150 N) in the presence of commercial dispersant RF1151 (monoallyl poly(isobutylene succinimide). The tribological properties of the lubricants were tested with a four-ball friction and wear tester. The friction-induced in-situ formation of carbon films on rubbed steel surfaces under the catalysis of Ni(acac) 2 was investigated, and the as-formed carbon films were characterized by scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The results show that Ni(acac) 2 added in the base oils can decompose to form metallic nickel to form nickel layer on the rubbed metal sub-surfaces and catalyze the degradation of the base oil molecules adsorbed to form carbon-based tribofilms. The carbon film formed from AN-5 with aromatic ring structure has a high degree of graphitization and the best friction-reducing and antiwear abilities, and those formed from PAO6 and 150 N with linear structure have a low degree of graphitization as well as good tribological properties. Under the lubrication of DIOS with Ni(acac) 2 , however, there is no carbon film formation while the tribological properties of the lubricant are relatively poor, due to the absence of the catalytic metallic nickel and nickel oxide layer on the rubbed metal sub-surface. Thanks to the catalytic effect of metallic nickel released from Ni(acac) 2 for the degradation of various base oils with different molecular structure, the present approach could provide a rational pathway to tune the in-situ formation of carbon-based tribofilm on rubbed steel surfaces so as to effectively reduce the friction and wear of steel-steel sliding pair.

In-situ synthesizing carbon-based film by tribo-induced catalytic degradation of PAO for reducing friction and wear.

Insight into the tribological performance and mechanisms of MoN-Ag/oil solid-liquid lubrication system based on catalytic effect

Tribocatalytically-activated formation of protective friction and wear reducing carbon coatings from alkane environment

Adaptive TiN-Cu/PAO Composite Lubrication System: the Tribocatalysis-induced PAO6 Transferring to Amorphous Carbon

In-situ tribo-induced formation of superb lubricious carbon-based tribofilms on the catalytical active MoN-Ag film surfaces

Tribo-catalysis Triggered the In-Situ Formation of Amphiphilic Molecules to Reduce Friction and Wear

Enhancing tribological properties of carbon-based films through catalytic Ni 3 C

Tribo-Induced Catalytically Active Oxide Surfaces Enabling the Formation of the Durable and High-Performance Carbon-Based Tribofilms

Tribochemical Behaviors of Onion-like Carbon Films As High-Performance Solid Lubricants with Variable Interfacial Nanostructures

Alkyl-functionalized black phosphorus nanosheets triggers macroscale superlubricity on diamond-like carbon film

Synergistic lubrication effect of OLC and MoDTC for reducing friction and wear of MAO ceramic coating on TC4 alloy

In Situ‐Formed Ultralow Wear Tribofilms Induced by Poly(Acrylic Acid)‐co‐MXene‐Modified Polymer‐Like Carbon Films

Controllable in situ fabrication of self-lubricating nanocomposite coating for light alloys

Tribochemical synthesis of functionalized covalent organic frameworks for anti-wear and friction reduction

Tribo-induced Evolution of Nodular Supporting Structures Providing High-Performance Solid Lubricants in Carbon Nanotube Coated Films

Catalyzing Green Lubricants into Graphitic Carbon Layers by Iron Single Atoms to Reduce Friction and Wear

Silica-Coated N-Doped Porous Carbon Nanospheres as Antiwear and Friction-Reduction Lubricant Additives

Ultrastable Lubricating Properties of Robust Self-Repairing Tribofilms Enabled by in Situ-Assembled Polydopamine Nanoparticles.

Effect of Nickel Acetyl Acetonate as Lubricant Additive in Base Oils with Different Molecular Structure on In-Situ Formation and Tribomechanism of Carbon-Based Tribofilms of Steel-Steel Sliding Pair

Tribological performance of Mn3(PO4)2 coating and PC/MoS2 coating in Rolling–Sliding and pure sliding contacts with gear oil

Component selection and nano-structuring of WS2/MoS2/a-C thin-film coatings for effective friction reduction in difficult conditions of sliding