Abstract:In this experimental investigation, a core–shell-structured nano-lubricating additive was synthesized utilizing the dielectric barrier discharge plasma (DBDP)-assisted ball grinding technique for a duration of 5 h. The microstructural analysis of the nano-TiO2 powder was performed employing advanced methods such as X-ray diffraction (XRD) and thermogravimetry–differential scanning calorimetry (TG-DSC). The initial particle size of TiO2 was refined from 1 μm to a range of 150–200 nm, resulting in a remarkable increase in lattice distortion rate by 88.2% and an oil affinity enhancement of 200%. Through the introduction of CTAB’s oil-compatible group onto the surface of nano-TiO2 particles, a modified layer with a thickness of 21 nm possessing superior thermal stability and an activation energy (E a) of 600 kJ/mol was successfully produced. Molecular dynamics simulations were conducted to elucidate the mechanism underlying the surface modification of nano-TiO2 powder facilitated by DBDP-assisted ball grinding, thereby revealing the pivotal role of electrostatic forces in the organic modification of the TiO2 surface. It was found that electrostatic forces dominantly govern the cetyl trimethyl ammonium bromide (CTAB)–TiO2 composite interface model, contributing to 70% of the total energy with a maximum energy proportion of −187.84 kcal/mol. To evaluate the lubrication performance of the composite oil samples under boundary lubrication conditions, comprehensive assessments were carried out using the four-ball method and reciprocating friction experiments. The results demonstrated noteworthy enhancements in viscosity index, dynamic viscosity, and oil film thickness within the composite oil samples. Particularly, the composite oil containing 0.5 wt % TiO2@CTAB exhibited outstanding extreme pressure resistance, manifesting a significant reduction of 41.7% in the average friction coefficient, a considerable increase of 25.8% in wear spot diameter, and a substantial elevation of 66.9% in maximum nonseizure load. Compared to the base oil, the incorporation of 0.5 wt % TiO2@CTAB led to a notable increment of 34.7% in oil film thickness, 6.7% in dynamic viscosity, and 9% in viscosity index. In the tribological experiment simulating marine diesel engines, the friction coefficient witnessed a remarkable reduction by 65.8%, accompanied by a substantial decrease of 54.1% in wear rate. This noteworthy improvement in boundary lubrication conditions of the friction pair effectively mitigated friction and wear. For comprehensive characterization of the wear marks, energy-dispersive spectrometry (EDS) and X-ray photoelectron spectroscopy (XPS) techniques were employed to analyze the physical structure and chemical composition. The implementation of TiO2@CTAB nano-lubricating additives resulted in nanobearing and deposition effects, leading to a reduction in contact area and surface roughness, thereby facilitating the restoration of the friction pairs. These findings possess significant implications for extending the service life of diesel engines and ensuring safe navigation. Furthermore, these studies underscore the considerable potential of core–shell-structured TiO2@CTAB for widespread application in diesel engines.

Adaptive TiN-Cu/PAO Composite Lubrication System: the Tribocatalysis-induced PAO6 Transferring to Amorphous Carbon

Insight into the tribological performance and mechanisms of MoN-Ag/oil solid-liquid lubrication system based on catalytic effect

Surface characterization of steel/steel contact lubricated by PAO6 with novel black phosphorus nanocomposites

In-situ synthesizing carbon-based film by tribo-induced catalytic degradation of PAO for reducing friction and wear.

Preparation and tribological properties of solid-liquid synergetic self-lubricating PTFE/SiO2/PAO6 composites

In-situ tribo-induced formation of superb lubricious carbon-based tribofilms on the catalytical active MoN-Ag film surfaces

Tribo-catalysis Triggered the In-Situ Formation of Amphiphilic Molecules to Reduce Friction and Wear

The tribological performance of W-DLC in solid–liquid lubrication system addivated with Cu nanoparticles

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Designing a PAI/PTFE coating with enhanced high-temperature tribological properties by S8-POSS: Solid-liquid dual lubrication

Synergistic Tribological Effects of Ti3C2Tx MXene and ZDDP under Simple Grafting Strategies for Efficient Lubrication

Tribo-Induced Catalytically Active Oxide Surfaces Enabling the Formation of the Durable and High-Performance Carbon-Based Tribofilms

Self-Adaptive Macroscale Superlubricity Based on the Tribocatalytic Properties of Partially Oxidized Black Phosphorus

Effect of PAO-4 and MoDTC + ZnDTP oil additive lubricants on the tribological performance of novel tetrahedral amorphous carbon (ta-C) coatings

Preparation and tribological behaviors of magnesium silicate hydroxide-MoS2 nanoparticles as lubricant additive

Oleic acid modified oxide graphene/triazine-based covalent-organic frameworks composite: Cooperation between heterostructure and electrical double layer to enhance tribological performances

Interface construction of micro/nano hierarchical structure to enhance the tribological performance of carbon fabric/phenolic composite

Strengthening mechanism of in-situ synthesized Cu2S nanoparticles on tribological performance of polyamide-imide bonded solid lubricating coatings

Tribological Properties of TiO 2 @CTAB Core–Shell Nanopowders as Lubricating Additives

Multilayer Tribofilm: An Unique Structure to Strengthen Interface Tribological Behaviors

Strengthening mechanism of different morphologies of nano-sized MSH on tribological performance of phosphate/MoS2 bonded solid lubricating coatings