Abstract:This paper focuses on the fabrication of a series of TiBN-Cu films with varying B content using a non-equilibrium magnetron sputtering process. The microstructure, mechanical properties, and tribological performance under polyalphaolefin(PAO) lubrication of these films were fully investigated. The results indicate that the TiBN-Cu films are composed of fcc-TiN, fcc-Cu, hcp-TiB2, and alpha-BN. Under PAO6 lubrication, the friction coefficient and wear rate of the TiBN-Cu/PAO composite system first decrease and then slightly increase. The mechanisms behind the enhanced lubrication behavior in terms of wear and friction of the composite system were thoroughly investigated, focusing on the lubrication state, PAO molecular adsorption behavior, and tribochemical products. The lubrication state revealed that the surface roughness of the films directly affects the continuity of the oil film. Calculations of the surface energy revealed that the surface energy of the films decreases gradually with increasing B content, exhibiting oleophilic characteristics that are conducive to the spread of PAO6 on the film's surface. Based on Density functional theory(DFT), calculations of the adsorption energy in the composite system indicated the formation of a robust physicochemical adsorption layer on the surface of the TiBN-Cu/PAO composite. Raman spectroscopy and transmission electron microscope(TEM) analyses of the tribochemical products revealed the in-situ generation of an amorphous carbon-hydrogen lubricating film with good lubricating performance on the TiBN-Cu composite film under PAO6 lubrication, due to a friction-induced catalytic effect. Additionally, molecular dynamics(MD) simulations based on the theory of molecular dynamics were conducted to explore the degradation process of PAO6 molecules in the solid-liquid composite system under friction, clarifying the "adsorption, dehydrogenation, carbon chain breaking, and carbon chain reconstruction" process in the TiBN-Cu/PAO system. These aspects collectively contribute to enhancing the tribological performance of the TiBN-Cu/PAO composite system. A durable, stable, and efficient TiBN-Cu/PAO solid-liquid composite lubrication system under in-situ and ambient conditions was achieved in this paper.

Multilayer Tribofilm: An Unique Structure to Strengthen Interface Tribological Behaviors

Tribochemical Behaviors of Onion-like Carbon Films As High-Performance Solid Lubricants with Variable Interfacial Nanostructures

Tribo-Induced Catalytically Active Oxide Surfaces Enabling the Formation of the Durable and High-Performance Carbon-Based Tribofilms

In-situ Formed Carbon Based Composite Tribo-Film with Ultra-High Load Bearing Capacity

Oleic acid modified oxide graphene/triazine-based covalent-organic frameworks composite: Cooperation between heterostructure and electrical double layer to enhance tribological performances

X‐ray Absorption Near‐edge Structure Analysis of Tribofilms Generated by Highly Efficient, Friction‐reducing Additive in Water–polyglycol–glycol Lubricant

Tribological Behaviors of a Novel Trilayer Nanofilm: the Influence of Outer Chain Length and Interlayer Thickness

Tribo-induced Evolution of Nodular Supporting Structures Providing High-Performance Solid Lubricants in Carbon Nanotube Coated Films

Insight into the tribological performance and mechanisms of MoN-Ag/oil solid-liquid lubrication system based on catalytic effect

Tribochemical synthesis of functionalized covalent organic frameworks for anti-wear and friction reduction

Stable and Durable TiBN-Cu/polyalphaolefin(PAO) Composite Lubrication System: Enhanced Lubrication Performance Through PAO Physicochemical Adsorption

Tribofilm Formation and Friction Reduction Performance on Laser-Textured Surface with Micro-Grooved Structures

Enhancing tribological properties of carbon-based films through catalytic Ni 3 C

Atom Probe Tomography Unveils Formation Mechanisms of Wear-Protective Tribofilms by ZDDP, Ionic Liquid, and Their Combination.

Influence of Tribofilm on Superlubricity of Highly-Hydrogenated Amorphous Carbon Films in Inert Gaseous Environments

Synthesis of ultrathin two-dimensional metal-organic framework nanosheets for lubricant additives

Tribological behavior of sulfonitrided tribofilm generated from non-corrosive dimercaptobenzothiadiazole-based additives as effective boundary lubrication layer

In Situ‐Formed Ultralow Wear Tribofilms Induced by Poly(Acrylic Acid)‐co‐MXene‐Modified Polymer‐Like Carbon Films

Tribo-Surface Variation Caused by Ti2AlC and Ti3AlC2 Particles-Containing Lubricant under Cyclic Impact Loading

In-situ formation of an ultra-low wear boundary tribofilm from carboxylic acid molecules

Dynamics of Tribofilm Formation in Boundary Lubrication Investigated Using In Situ Measurements of the Friction Force and Contact Voltage