Abstract:In this study, we mainly focus on the structural morphology and inter-atomic bonding state of tribofilms resulting from a highly-hydrogenated amorphous carbon (a-C:H) film in order to ascertain the underlying mechanisms for its superlubric behavior (i.e., less than 0.01 friction coefficient). Specifically, we achieved superlubricity (i.e., friction coefficients of down to 0.003) with this film in dry nitrogen and argon atmospheres especially when the tribo-pair is made of an a-C:H coated Si disk sliding against an a-C:H coated steel ball, while the a-C:H coated disk against uncoated ball does not provide superlubricity. We also found that the state of superlubricity is more stable in argon than in nitrogen and the formation of a smooth and uniformly-thick carbonaceous tribofilm appears to be one of the key factors for the realization of such superlubricity. Besides, the interfacial morphology of sliding test pairs and the atomic-scale bond structure of the carbon-based tribofilms also play an important role in the observed superlubric behavior of a-C:H films. Using Raman spectroscopy and high resolution transmission electron microscopy, we have compared the structural differences of the tribofilms produced on bare and a-C:H coated steel balls. For the a-C:H coated ball as mating material which provided superlow friction in argon, structural morphology of the tribofilm was similar or comparable to that of the original a-C:H coating; while for the bare steel ball, the sp2-bonded C fraction in the tribofilm increased and a fingerprint-like nanocrystalline structure was detected by high resolution transmission electron microscopy (HRTEM). We also calculated the shear stresses for different tribofilms, and established a relationship between the magnitude of the shear stresses and the extent of sp3-sp2 phase transformation.

In-situ tribo-induced formation of superb lubricious carbon-based tribofilms on the catalytical active MoN-Ag film surfaces

Insight into the tribological performance and mechanisms of MoN-Ag/oil solid-liquid lubrication system based on catalytic effect

Tribo-Induced Catalytically Active Oxide Surfaces Enabling the Formation of the Durable and High-Performance Carbon-Based Tribofilms

In situ visualization study of tribofilm growth process from magnesium silicate hydroxide nanoparticles

In-situ synthesizing carbon-based film by tribo-induced catalytic degradation of PAO for reducing friction and wear.

Tribochemical Behaviors of Onion-like Carbon Films As High-Performance Solid Lubricants with Variable Interfacial Nanostructures

Adaptive TiN-Cu/PAO Composite Lubrication System: the Tribocatalysis-induced PAO6 Transferring to Amorphous Carbon

Enhancing tribological properties of carbon-based films through catalytic Ni 3 C

Shear-induced interfacial reconfiguration governing superlubricity of MoS2-Ag film enabled by diamond-like carbon

Tribofilm Formation and Friction Reduction Performance on Laser-Textured Surface with Micro-Grooved Structures

Tribochemical synthesis of functionalized covalent organic frameworks for anti-wear and friction reduction

Suppressed MoO3/FeMoO4 formation in molybdenum dialkyl-dithiocarbamate-derived tribofilms on nitrogen-incorporated Al-Mg-Ti-B coatings

In situ tribological regulation behavior induced by MSH@LaF 3 in phosphate/MoS 2 bonded solid lubricating coatings

Tribo-catalysis Triggered the In-Situ Formation of Amphiphilic Molecules to Reduce Friction and Wear

In-situ Formation of Tribofilm with Ti3C2Tx MXene Nanoflakes Triggers Macroscale Superlubricity

Selective-releasing-affected Lubricant Mechanism of a Self-Assembled MoS2/Mo-S-C Nanoperiod Multilayer Film Sliding in Diverse Atmospheres.

Dynamics of Tribofilm Formation in Boundary Lubrication Investigated Using In Situ Measurements of the Friction Force and Contact Voltage

Tribocatalytically-activated formation of protective friction and wear reducing carbon coatings from alkane environment

Influence of Tribofilm on Superlubricity of Highly-Hydrogenated Amorphous Carbon Films in Inert Gaseous Environments

Nanostructure of Superlubricating Tribofilm Based on Friction-Induced a-C:H Films under Various Working Conditions: A Review of Solid Lubrication

Multilayer Tribofilm: An Unique Structure to Strengthen Interface Tribological Behaviors